PLL502-13 Datasheet, PDF (1/6 Pages) PhaseLink Corporation – 192MHz - 400MHz Low Phase Noise PECL VCXO (12 - 25MHz Crystal)

Preliminary PLL502-13
192MHz – 400MHz Low Phase Noise PECL VCXO (12 – 25MHz Crystal)
FEATURES
• Low phase noise output for the 192MHz to
400MHz range (-115 dBc at 10kHz offset).
• PECL output.
• 12 to 25MHz crystal input.
• Integrated crystal load capacitor: no external
load capacitor required.
• Output Enable selector.
• Wide pull range (min. +/-190 ppm)
• 3.3V operation.
• Available in 16 Pin TSSOP or SOIC.
DESCRIPTION
The PLL502-13 is a monolithic low jitter and low
phase noise (-115dBc/Hz @ 10kHz offset) VCXO IC
with PECL output, for 192MHz to 400MHz output
range. It allows the control of the output frequency
with an input voltage (VIN), using a low cost crystal.
The chip provides a pullable output at a frequency of
FXIN x 16. This makes the PLL502-13 ideal for a wide
range of applications.
BLOCK DIAGRAM
PIN CONFIGURATION
VDD 1
VDD 2
XIN 3
XOUT 4
OE 5
VIN 6
GND 7
GND 8
16 VDD
15 GND_BUF
14 CLKBAR
13 VDD_BUF
12 CLK
11 GND_BUF
10 GND
9 GND
FOUT = FXIN x 16
OE (Pin 5)
Output State
0 (Default)
Output enabled
1
Tri-state
Pin 5: Logical states are defined at PECL levels.
Reference
Divider
XIN
XOUT
XTAL
OSC
VARICAP
VIN
VCO
Divider
Phase
Comparator
Charge
Pump
Loop
Filter
VCO
OE
CLKBAR
CLK
47745 Fremont Blvd., Fremont, California 94538 TEL [phone] FAX [phone]
Rev 7/15/02 Page 1