PE3345BEW Datasheet, PDF (7/9 Pages) Pletronics, Inc. – PE3XB Series 2.5 V PECL Clock Oscillators

PE3XB Series 2.5 V
PECL Clock Oscillators
January 2008
Mechanical (obsolete version):
The cover is no longer being supplied over this part. This part is made with a hermetically sealed
PE99xxDV series oscillator. This part is now exposed.
The cover has been deleted, the cover was causing problems with the newer high temperature RoHS lead
free processes. The cover purpose was only cosmetic.
All parts with 2008 date codes will be made in the new fashion.
There is no change in electrical properties.
Pletronics does recommend that all designs should transition to the PE99xxDV ceramic part.
FR4 PCB Base:
Solder masked
All via holes tented on bottom
Copper Clad ½ oz. Typical
Gold plated 0.02 µinch (0.5 µm)
Label:
White Kapton with Black Letters
–or--
Blue Epoxy heat cure ink covering
top with laser marked lettering
Cover:
Centered on the base
304 Stainless Steel
0.010 inch (0.25µm)
Electroless Nickel Plated
1 µinch (25 µm) typical
Pin 3 Ground plane is typical
Not to scale
Inches
mm
B 0.550 +_0.010 13.97 +_0.25
A 0.390 +_0.010 9.90 +_0.25
C 0.105 +_0.010 2.67 +_0.25
D¹ 0.026 typ.
0.66
E¹ 0.050
1.27
F¹ 0.028 R
0.72 R
G¹ 0.180
4.57
H¹ 0.100
2.54
I¹ 0.050
1.27
J¹ 0.015
0.38
K¹ 0.380
9.65
• The package is not hermetically sealed.
• The sides are intentionally left open to permit cleaning material to freely flow in the package, thus
minimizing the accumulation of contaminants during cleaning processes.
• The internal part of the package must be thoroughly dry before operating.
www.pletronics.com
425-776-1880
7