PE9645DEV Datasheet, PDF (5/8 Pages) Pletronics, Inc. – PE96/PE98 Series 3.3 V PECL Clock Oscillators

PE96/PE98 Series 3.3 V
PECL Clock Oscillators
January 2008
Reliability: Environmental Compliance
Parameter
Mechanical Shock
Vibration
Solderability
Thermal Shock
Condition
MIL-STD-883 Method 2002, Condition B
MIL-STD-883 Method 2007, Condition A
MIL-STD-883 Method 2003
MIL-STD-883 Method 1011, Condition A
ESD Rating
Model
Human Body Model
Charged Device Model
Minimum Voltage
1500
1000
Conditions
MIL-STD-883 Method 3115
JESD 22-C101
Package Labeling
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Courier New
Bar code is 39-Full ASCII
(The part number will show as PE96xx or PE98xx)
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Arial
Layout and application information
For Optimum Jitter Performance, Pletronics recommends:
• a ground plane under the device
• no large transient signals (both current and voltage) should be routed under the device
• do not layout near a large magnetic field such as a high frequency switching power supply
• do not place near piezoelectric buzzers or mechanical fans.
As much ground plane and thermal paths that can be realized under and to the side of the part is desired.
www.pletronics.com
425-776-1880
5