PE3745TEV Datasheet, PDF (5/8 Pages) Pletronics, Inc. – PE37T Series 3.3 V PECL Clock Oscillators

PE37T Series 3.3 V
PECL Clock Oscillators
January 2008
Reliability: Environmental Compliance
Parameter
Mechanical Shock
Vibration
Solderability
Thermal Shock
Condition
MIL-STD-883 Method 2002, Condition B
MIL-STD-883 Method 2007, Condition A
MIL-STD-883 Method 2003
MIL-STD-883 Method 1011, Condition A
ESD Rating
Model
Human Body Model
Charged Device Model
Minimum Voltage
1500
1000
Conditions
MIL-STD-883 Method 3115
JESD 22-C101
Package Labeling
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Courier New
Bar code is 39-Full ASCII
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Arial
Layout and application information
Recommend connecting Pad 1 and Pad 2 together to permit the design to accept both Enable/Disable
input pad versions to be used (See PE11T for E/D on pad 2)
For Optimum Jitter Performance, Pletronics recommends:
• a ground plane under the device
• no large transient signals (both current and voltage) should be routed under the device
• do not layout near a large magnetic field such as a high frequency switching power supply
• do not place near piezoelectric buzzers or mechanical fans.
www.pletronics.com
425-776-1880
5