PE9945DEV Datasheet, PDF (3/8 Pages) Pletronics, Inc. – PE99D Series 3.3 V PECL Clock Oscillators

PE99D Series 3.3 V
PECL Clock Oscillators
February 2008
Electrical Specification for 3.30V _+10% over the specified temperature range and
the frequency range of 10.9 MHZ to 766 MHZ and 876 MHZ to 1,175MHz
Item
Frequency Accuracy “45"
“44"
“20"
Output Waveform
Output High Level
Output Low Level
Output Peak to Peak Level
Output Symmetry
Jitter
Output T_RISE and T_FALL
V_CC Supply Current (I_CC)
Enable/Disable Internal Pull-up
V disable
V enable
Output leakage
Enable time
V_OUT = V_CC
V_OUT = 0V
Disable time
Start up time
Operating Temperature Range
Storage Temperature Range
Min Max
Unit
-50 +50
ppm
-25 +25
-20 +20
PECL / ECL
2.12 2.49 volts
0.82 1.19 volts
-1.18 -0.81 volts
1.83 1.99 volts
0.53 0.69 volts
-1.47 -1.31 volts
0.405 1.076 volts
47
53
%
-
0.6 pS RMS
-
2.8 pS RMS
100 300
pS
-
90
mA
50
-
Kohm
-
0.8
volts
2.00 -
volts
-50 +50
uA
-50 +50
uA
-
10
nS
-
10
nS
-
5
mS
-10 +70
o_C
- 40 +85
o_C
-55 +125
o_C
Condition
For all supply voltages, load changes, aging for 1
year, shock, vibration and temperatures
Referenced to Ground, V_CC = 3.3 V
Referenced to termination voltage, V_CC = 3.3 V
Referenced to Vcc, V_CC = 3.3 V
Referenced to Ground, V_CC = 3.3 V
Referenced to termination voltage, V_CC = 3.3 V
Referenced to Vcc, V_CC = 3.3 V
at 50% point of V_CC (See load circuit)
12 KHz to 20 MHZ from the output frequency
10 Hz to 20 MHZ from the output frequency
Vth is 20% and 80% of waveform
to V_CC
Referenced to pad 3
Referenced to pad 3
Pad 1 low, device disabled
Time for output to reach a logic state
Time for output to reach a high Z state
Time for output to reach specified frequency
Standard Temperature Range
Extended Temperature Range “E” Option
Specifications with Pad 1 E/D open circuit or connected to V_CC
www.pletronics.com
425-776-1880
3