SM23CBE-10 Datasheet, PDF (1/1 Pages) Pletronics, Inc. – 4 Pad 11.6x5.5mm Surface Mount Crystal

Pl tronics, Inc.
. _{19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA}
Manufacturer of High Quality Frequency Control Products
SM23C Crystal
4 Pad 11.6x5.5mm Surface Mount Crystal (Ceramic Cover /Ceramic Base)
Standard Specifications
Calibration Frequency Tolerance at 25^°C
Operating Temperature Range (OTR)
Frequency Stability (FS) over OTR
Drive Level
Aging at 25°C
3.570 MHz – 120.000 MHz
± 30 PPM is standard, tighter tolerances available
0 to +70°C is standard, but can be extended to -40 to +85°C
± 50 PPM is standard, tighter tolerances available
100 mW is standard, customer may specify
± 5 PPM maximum
Part Numbering Guide
ESR Values
Portions of the part number that appear after the frequency may not
be marked on part (C of C provided)
Oscillation
Mode
Frequency Range Maximum
(MHz)
ESR (Ohms)
SM23C B E - xx - 70.0M - XXX (Internal Code or blank)
Model
Frequency in MHz
Cal Tol / Freq Stability
Blank = 30/50
B = 30/30
C = 15/30
D = 10/20 (consult factory)
Load Capacitance
Parallel Resonance in pF (³ 10 pF)
SR = Series Resonance
Temperature Range
Blank: 0 to +70°C
E: - 40 to +85°C
H: - 20 to +70°C
Fundamental 3.570 – 3.999
200
AT Cut
4.000 – 5.999
150
6.000 – 8.999
100
9.000 – 12.999
60
13.000 – 27.000
40
3rd Overtone 27.001 – 120.000
80
AT Cut
Consult factory for lower ESR
Consult factory for available frequencies and specs.
Not all options available for all frequencies. A special part number may be assigned.
Mechanical: inches (mm)
not to scale
Solder Pads
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
Packaging
24mm tape
16mm pitch
.09 (2.4)
.09 (2.3)
.217 (5.5 ± .5)
.09 (2.2)
MAX
.04 (1.1)
Sep 2003
Pl tronics, Inc. (425) 776 -1880, Fax: [phone], [e-mail], www.pletronics.com
35