PAS5101CS Datasheet, PDF (8/19 Pages) Pixart Imaging Inc. – CMOS 1.3MEGA DIGITAL IMAGE SESNSOR

PAS5101CS Specification
3.7. Sub-Sampling
PAS5101CS can be programmed to output image in VGA、 QVGA and QQVGA size. In the VGA sub-
sampling mode, both vertical and horizontal pixels are sub-sampling at 1/2; In QVGA sub-sampling mode,
both vertical and horizontal pixels are sub-sampling at 1/4; While in QQVGA sub-sampling mode, sub-
sampling at 1/8. By programming Skip_Analog and Skip_Digital, The maximum sub-sampling rate is
1/32 ( Skip_Analog + Skip_Digital ).
3.7.1. Skip_Analog
Sub-sampling ( Skip_Analog ) to VGA ( 640x480 ) pixels readout ( With 4 dark lines ):
H_Start[9:0] = 0,
V_Start[8:0] = 0,
H_Size[9:0] = 1287, V_Size[8:0]= 1035,
LPF[7:0] = 519,
Nov_Size_By4[7:0] = 63, Skip_Analog = 1 ( sub-sampling 1/2 )
Figure 3.6
Valid pixel = ( H_Size + 1 ) / Skip_Analog = 1288 / 2 = 644
Valid line = (((( V_Siez + 1 ) – 4 ) / Skip_Analog ) + 4) = (((( 1035 + 1 ) – 4 ) / 2 ) + 4 ) = 520
Figure 3.7 Inter-line timing of W.O.I
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.
8
PixArt Imaging Inc.
E-mail: [e-mail]
v1.0 2005/4/27