PAW3602DH-NF Datasheet, PDF (7/33 Pages) Pixart Imaging Inc. – CMOS LASER MOUSE SENSOR

PixArt Imaging Inc.
PAW3602DH-NF
CMOS Laser Mouse Sensor
0x06
Bit
Field
Usage
Notes
Configuration
7
6
5
4
3
2
1
0
Reset
Reserved[3:2]
PD
Reserved[1:0]
RES
The Configuration register allows the user to change the configuration of the sensor.
Shown below are the bits, their default values, and optional values.
Field Name
Reset
Description
Reset full chip
0 = Normal operation (Default)
1 = Reset the fully chip
Reserved[3:2]
PD
Reserved[1:0]
RES
Reserved for future. Must be written to “00”
Power down mode
0 = Normal operation (Default)
1 = Power down mode
Reserved for future. Must be written to “00”
Output resolution setting. In the power-on initial state, the resolution is depend
on the CPI IO trap select pin. If MCU write the register, it is depend on the
register value.
0 = 1600
1 = 800
0x07
Bit
Field
Usage
Notes
Image_Quality
7
6
5
4
3
2
1
0
Imgqa[7:0]
Image Quality is a quality level of the sensor in the current frame. Report range 0~255. The
minimum level for normally working is 45.
Field Name Description
Imgqa[7:0] Image quality report range: 0(worst) ~ 255(best).
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.
7
PixArt Imaging Inc.
E-mail: [e-mail]
V1.0, Jun. 2007