PAC7010 Datasheet, PDF (3/5 Pages) Pixart Imaging Inc. – motion tracing ASIC

文件標題 : PAC7010LU Specification Spec.
DOCUMENT CONTROLLED
文件編號 :
版 次 : 01
Page 3 of 5
3 Ball Description:
 14-Balls CSP
Ball No. Name
A1
RSTN
A3
ATPG
A4 VDDAY
B1
CLKEN
B2
RXD
B3 VDDA18V
B4
VSSA
C1
VSYNC
Type Definition
IN Reset pin, low active
IN Test Mode Select; active high
IN Internal voltage reference
OUT Control External Oscillator enable pin; if high CLK input
IN RXD for UART
PWR Regulator output for Analog power
GND Analog ground
OUT Sensor Vsync
Reg_0x28 Bit[7]:
If Reg_0x28 bit0=1; bit7=0 output low, bit7=1output high
C2 OMDO/GPO OUT _{Reg_0x28 Bit[0] defined OMDO/GPO pin as:}
0: OMDO output object motion detect output pin.
1: GPO generation purpose output (defined by Reg_0x28 bit[4:0])
C3 VDDMAIN PWR 2.0V ~ 3.6V External provide for PAC7010 regulator power
C4 VDDD18V PWR Regulator output for Digital power
D1
VSSD GND Digital ground
D3
TXD
OUT TXD for UART
D4
CLK
IN Oscillator input for system clock,
本資料所有權屬原相科技股份有限公司, 非經准許不可翻印、複印或轉變任何其他形式.
This specification is the property of PixArt and shall not be reproduced, copied or transformed to any other forms without permission.