PAW3212DB-TJDT Datasheet, PDF (24/31 Pages) Pixart Imaging Inc. – ULTRA LOW POWER WIRELESS MOUSE SENSOR

PAW3212DB-TJDT
Operation_Mode
Access: Read/Write
Bit
7
Field
Reserved
6
Reserved
5
Reserved
Address: 0x05
Default Value: 0xB8
4
3
Slp_Enh Slp2_Enh
2
1
Slp1mu_Enh Slp1mu_Enh
0
Wakeup
Data Type: Bit field.
Usage:
Operation_Mode register allows users to change the sensor operation modes. The various combinations of bit4~bit0 are listed
below.
“0xxxx” = Sleep1 and Sleep2 mode are all disabled
“10xxx” = Sleep1 mode is enabled but Sleep2 mode is disable
“11xxx” = Sleep1 and Sleep2 modes are all enabled
“11100” = Force sensor to enter Sleep2 mode
“1x010” = Force sensor to enter Sleep1 mode
“1x001” = Make sensor wake up from Sleep mode to Run mode
For Slp2mu_Enh / Slp1mu_Enh / Wakeup bit, only one of them can be set to 1 at the same time and the bit which is set will be
reset automatically. To force sensor always stay at Run mode, please set Slp_Enh=0, Slp2_Enh=0 and Wakeup=1
simultaneously.
Field Name
Slp_Enh
Slp2_Enh
Slp2mu_Enh
Slp1mu_Enh
Wakeup
Description
Enable/Disable Sleep mode (including Sleep1 and Sleep2)
0 = Disable
1 = Enable (Default)
Enable/Disable Sleep2 mode
0 = Disable
1 = Enable (Default)
Force to enter Sleep2 mode.
Set “1” to enter Sleep2, and then it will be reset to “0” automatically
Force to enter Sleep1 mode.
Set “1” to enter Sleep1, and then it will be reset to “0” automatically
Wakeup sensor from Sleep mode.
Set “1” to wake up and then it will be reset to “0” automatically
_____________________________________________________________________________________________________________________________
All rights strictly reserved, any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.
E-mail: [e-mail]
PixArt Imaging Confidential
PAW3212DB-TJDT-DS-R1.2-19112014
24