|
PAP1100 Datasheet, PDF (2/3 Pages) Pixart Imaging Inc. – Low Power 10 Touch Controller | |||
|
◁ |
PAP1100QN: Low Power 10 Touch Controller
Description
The PAP1100QN is a low-power, 10-touch
controller designed specifically to provide a
touch screen system with high report rate, touch
accuracy, and responsive on-screen navigation,
with very low latency. The IC uses a mutual-
capacitance measurement technique, where it
senses capacitance changes on the touch
panel, and detects multiple touch points
simultaneously.
The PAP1100QN touch controller is designed
specifically for applications in a high-noise
environment. It is robust against common-mode,
display, and RF noise; thereby eliminating the
need for a Ground shield on the touch panel,
reducing system cost. Its high-density
drive/sense lines support touch screens up to 5â,
with 10 simultaneous touch points. A passive
stylus is also supported. Larger screens can
also be supported where fine-cell spacing is not
a priority.
The low-power design is ideal for extending
battery life. Programmable power modes
include:
Run mode
[150 Hz report rate, 1 TP]
Run mode
[150 Hz report rate, 5 TPs]
Shutdown
25 mW
30 mW
145 μW
Additional programmable Idle/Rest modes are
also available.
There are 30 kbytes of Flash memory for Pixart
supplied based-line operational code storage. In
addition, there are 2 kbytes of Flash memory for
application-specific data storage, such as saved
register settings, customized configurations of
drive/sense mapping, buttons, sliders and
haptics. There is no overlap between the 30
kbytes and 2 kbytes spaces.
The controller IC operates from a single 1.72 â
2.0 V or 2.5 â 3.6 V supply voltage, with I/O
voltage from 1.6 to 3.6 V. The part is housed in
a 6 x 6 x 0.55 mm 48-pin TQFN package.
Features
ï· Multi-touch navigation (up to 10 points)
ï· Support for up to 5â screen (larger
depending on application)
ï· Adjustable touch thresholds for up to 1.5
mm PMMA or PC curved lens
ï· Cover lens: up to 2 mm glass or 1.5 mm
PMMA
ï· Gesture support
ï· Buttons and sliders support
ï· Opens/shorts test support
ï· Internal flash for saving user settings
ï· 1200 DPI resolution at full screen
ï· Greater than 200 Hz configurable report rate
ï· Fast response time: < 10 ms
ï· SPI/I2C host interface
ï· Operating temperature: -20 to +70 ï°C
ï· Haptics output, support for up to 10
waveforms, and a variety of triggers
ï· Lead-free RoHS compliant
Applications
ï· Smart phones
ï· Portable Media Players
ï· Mobile Internet Devices (MID)
ï· Personal Navigation Devices (PND)
ï· Tablet PCâs
|
▷ |