English
Language : 

PAN301BSI-208 Datasheet, PDF (11/27 Pages) Pixart Imaging Inc. – CMOS HIGH PERFORMANCE OPTICAL MOUSE SENSOR
PixArt Imaging Inc.
PAN301BSI-208
CMOS Optical Mouse Sensor
AC Operating Condition
Electrical Characteristics over recommended operating conditions. Typical values at 25 °C, VDD =3.3 V,
FCLK=18.432MHz
Symbol
Parameter
Min. Typ. Max. Unit
Notes
tPD
Power Down
tPDW
PD Pulse Width
500
700
us From PD↑. (Refer to Figure 15)
us
Pulse width to reset the serial interface. (Refer
to Figure 15)
tPDR
PD Pulse Register
One frame time maximum after setting bit 2
333 us in the Configuration register
@3000frame/sec. (Refer to Figure 17)
From PD↓ to valid quad signals. After tPUPD,
all registers contain valid data from first
tPUPD
Power Up from PD↓
9
30.5
ms
image after PD↓. Note that an additional 90
frames for Auto-Exposure (AE) stabilization
may be required if mouse movement occurred
while PD was high. (Refer to Figure 15)
tPU
Power Up from VDD↑
15
30.5 ms From VDD↑ to valid quad signals.
500usec + 90frames.
tHOLD
SDIO read hold time
3
us
Minimum hold time for valid data. (Refer to
Figure 11)
tRESYNC Serial Interface RESYNC. 1
tSIWTT
Serial Interface Watchdog
Timer Timeout
1.7
us @3000frame/sec (Refer to Figure 14)
ms @3000frame/sec (Refer to Figure 14)
t r , t f Rise and Fall Times: SDIO
25,
20
ns CL = 30pf
tr,tf
Rise and Fall Times:
XA, XB, YA, YB
25,
20
ns CL = 30pf
t r , t f Rise and Fall Times: ILED
10,
10
ns LED bin grade: R; R1=100ohm
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.
11
PixArt Imaging Inc.
E-mail: fae_service@pixart.com.tw
V1.1, MAY. 2004