PAW3702DL-TXNT Datasheet, PDF (10/33 Pages) Pixart Imaging Inc. – 3in1 SOC Low Power 2.4GHz Wireless Optical Mouse

PixArt Imaging Inc.
PAR2402QK-RB General Datasheet
2.4GHz Wireless Receiver for USB Dongle
2.6 RF Specifications
2.6.1 Transmitter RF Specifications
Table 8. Transmitter Specifications
Parameters
Symbol Min.
Typ.
Max. Unit
Conditions
Frequency Range
FRTX
2403
-
2479 MHz
Default Output Power
PO,DEF
-
0
-
dBm
Output Power Adjust Range
PO,ADJ
-6
-
+4
dBm
Output Power Variation
PO,VAR
-
1
-
dBm All channel TX power variation
TX 20dB Bandwidth
1^st Adjacent Channel
Power@±1MHz
BW20dB
-
PACP1
-
1100
-20
-
kHz
-
dBc
Frequency Deviation: 250kHz
Data rate: 1Mbps
2^nd Adjacent Channel
Power@±2MHz
PACP2
-
-40
-
dBc
Frequency Deviation: 250kHz
Data rate: 1Mbps
Frequency Deviation Set 250kHz ΔfD
-
±250
-
kHz Data rate: 1Mbps
2^ndHarmonics Power Level
Har2nd
-
-40
-
3^rdHarmonics Power Level
Har3rd
-
-45
-
Notes: Electrical Characteristics are measured under recommended operating conditions
dBm @Pout = 0dBm
dBm @Pout = 0dBm
2.6.2 Receiver RF Specification
Table 9. Receiver Specifications
Parameters
Symbol Min.
Typ.
Max. Unit
Conditions
Frequency Range
Maximum Input Power
Sensitivity
C/I and Selectivity
FRRX
2403
2479 MHz
RXMAX
0
dBm
SENIDEAL
-91
dBm BER<0.1%
C/I Co-Channel
C/ICO
9
dB
C/I Adjacent ±1MHz
C/I1M
-1
dB
C/I Adjacent ±2MHz
C/I2M
-35
dB
Note(1)
C/I Adjacent ±3MHz
C/I3M
-30
dB
C/I Adjacent > |±6MHz|
C/INM
-40
dB
C/I Adjacent > |±25MHz|
C/INM
-50
dB
Inter-Modulation Performance
Input power of IM interferers at
3/4/5 and 6/7/8 MHz distance
IMD
from wanted signal
-33
dBm Note(2)
Notes:
1. ACR testing: Wanted power is -67dBm and interference is modulated signal. The input power of interferers where the sensitivity
equals BER = 0.1% is presented.
2. Intermodulation testing: Wanted signal level at Pin = -64 dBm. Two interferers with equal input power are used. The interferer
closest in frequency is un-modulated, the other interferer is modulated equal with the wanted signal. The input power of
interferers where the sensitivity equals BER = 0.1% is presented.
Version 0.6 | 17 June 2016 | A1003AEN
PixArt Imaging Inc. http://www.pixart.com
All rights reserved. Any portion in this paper shall not be reproduced, copied, or transformed to any other forms without permission.
9