PCS27-DC Datasheet, PDF (2/2 Pages) Picker Components – DC Output Solid State Relay

PCS27 DC Output
PCS27DC Output
PRECAUTIONS
1. Soldering must be completed within 10s at 260°C or less or within 5s at 350°C or less.
2. The SSR case serves to dissipate heat. Install the relays so that they are adequately ventilated. If poor ventilation is unavoidable, the load current must be
reduced. Please refer to the curve of Max. Load current Vs Ambient Temperature.
3.. Please do not use the relay beyond the description in the data sheet. If it is a must to use it beyond description, please contact Jinxinrong for more technical
support.
DIMENSIONS (mm)
CHARACTERISTIC CURVES
3220 Commander Drive, Suite 102 Carrollton, TX 75006
Sales: [phone]
[phone]
Fax: [phone]
www.PickerComponents.com
e-mail: [e-mail]
Dimensions are listed for reference purposes only.
PCS27 DC Output Rev B 9/16/2015
Specifications and Availability subject to change without notice.
2 of 2