PC302_14 Datasheet, PDF (2/2 Pages) Picker Components – Microminiature 1 Amp Signal Relay

PC302
PC302
CHARACTERISTICS
Type
Single Side stable
Latching, L1 & L2
Operate Time
2 ms at nominal coil voltage
N/A
Set Time
N/A
2 ms at nominal coil voltage
Release Time
1 ms average
N/A
Reset Time
N/A
2 ms at nominal coil voltage.
Insulation Resistance 1000 Mmegohms min. at 500 VDC, ^50% RH
Dielectric Strength
1000 V rms, 1 min. between coil and contacts and between adjacent parts
500 V rms, 1 min. between open contacts
Surge Strength
Capacitance
Shock Resistance
Vibration Resistance
Allowable Max. Power
Consumption at 20 C
1500 V, between coil and contacts (FCC Part 68)
0.4 pf max. between contacts; 0.2 pf max. between adjacent poles; 0.9 pf max. between coil and contacts
50 g, 11 ms.
10 - 55 Hz; 3mm DA
0.4 W
Ambient Temperature
Power Consumption
Weight
-40 degrees C to 70 degrees C
0.14 to 0.2 W
5 grams approx.
-40degrees C to 70 degrees C
0.1 to 0.3 W
Dimensions in Inches (millimeters)
Drawings are 2X actual size
.551
(14.0)
.354
(9.0)
.197
(5.0)
(.120.504)TYP.
Single Side Stable
12345
+
-
10 9 8 7 6
.138
(3.5)
.300
(7.62)
Single Coil Latching
12345
+
-
10 9 8 7 6
Index Mark on top of relay
indicates position of pins 1 & 10
Pin Functions Bottom Views Shown
0.1 (2.54) Grid Pattern
10 Holes .032 (0.81)
Dual Coil Latching
12345
+
-
Set Coil
+
-
10 9 8 7 6
Reset Coil
Notes:
Tolerances + .010 unless otherwise noted
On single coil latching set polarity shown
3220 Commander Drive, Suite 102, Carrollton, Texas 75006
Sales: [phone] Fax: [phone] email: [e-mail] URL: pickercomponents.com
PAGE 2