PTRH-T_17 Datasheet, PDF (1/4 Pages) Picker Components – 30 Amp Power PCB Relay

30 Amp Power PCB Relay
PTRH-T
T2/T3
T4/T5
E86876
Load Type
Voltage
1 Form A 1 Form B
(SPST-NO) (SPDT-NC)
1 Form C
NO NC
277 VAC* 30 A
20 A
30 A 20 A
120 VAC 30 A
General Purpose
250 VAC 30 A
20 A
30 A 20 A
20 A
30 A 20 A
30 VDC 30 A
20 A
30 A 20 A
Resistive
120 VAC 30 A
20 A
30 A 20 A
(100.000 Cycles) 250 VAC 30 A
20 A
30 A 20 A
Motor
240 VAC 2 HP
—— 2 HP ——
(30,000 Cycles) 120 VAC 1 HP
—— 1 HP ——
LRA/FLA
240 VAC 80 A/30 A
120 VAC 96 A/30 A
——
——
80 A/30 ——
96 A/30 ——
*UL Approval
CHARACTERISTIC
Operate Time
Less than 15 ms
Release Time
Less than 10 ms
Insulation Resistance 1,000 MΩ min, at 500 VDC, 50% RH
Dielectric Strength
50 Hz 2,500 V 1 Min Between Coil and Contacts
4,000 V without Pin 6
50 Hz 1,500 V 1 min. Between Contacts
Power Consumption 0.9 W, 0.6 W
FEATURES
 Popular Power PCB Relay Footprint - T91
 30 Amp 250 VAC General Purpose UL Rating
 Two Versions:
 T2 (1A), T3 (1C) PC Pins & QC Pins
 T4 (1A), T5 (1C) QC Pins with Mounting Tabs
 UL Class F Insulation Optional
 Meets UL 508 and UL 873 Spacing
 RoHS Compliant
CONTACT DATA
Material
Initial Contact Resistance
AgCdO, AgSnO2In2O3, AgCdO+Au
50 mΩ Max. @ 1 A, 6 VDC
Maximum Switching Voltage
110 VDC, 300 VAC
Maximum Switching Current
30 A
Maximum Switching Power
900 W, 7,500 VA
Service Life ^Mechanical
Electrical
1 X 10⁷ Operations
5 X 10⁴ Operations
Meets UL 508 and UL 873 Spacing - 3.18 mm Through Air, 6.36 mm Over
Surface.
CHARACTERISTIC Continued
Shock Resistance
200 m/s, 11 ms
Vibration Resistance
10 - 55 Hz Double Amplitude
Terminal Strength
10N
Solderability
235 ºC for 3 secs
Operating Temperature Range - 55°C to 100°C Class B
Operating Temperature Range - 55°C to 125°C Class F
Relative Humidity
85% (at 40°C)
Weight
13.5 gr Approximately
Material Compliant To
EU RoHS V2. EU REACH V3
ORDERING INFORMATION
Example:
PTRH -1C -12 S F T -T5 -X
Model: PTRH (PTRH-T)
Contact Form: 1A, 1B, 1C
Coil Voltage: 3, 5, 6, 9, 12, 15, 24, 48, 110
Enclosure: T2 & T3: C: Dust Cover; S: Sealed;
T4 & T5: S: Covered, not Washable
Insulation Material: Nil: Class B; F: Class F
Contact Material: Nil: AgCdO; T: AgSnO2In2O3;; G; AgCdO+Au
Mounting Type: T2: 1 Form A PCB & QC; T3; 1 Form C PCB & QC:
T4: 1 Form 1A Panel all QC; T5: 1 Form C Panel all QC
RoHS Compliant: -X
Pinout: A: Alternate Quick Connect Pinout
Coil Sensitivity: Nil: 0.9 W**; 0.6: 0.6 W (**0.9 W is Industry Standard)
T2 & T3 Box Quantity: 600; Inner Box 300, T4 & T5 Box Quantity: 400: Inner Box:100
3220 Commander Drive, Suite 102 Carrollton, TX 75006
www.PickerComponents.com
Sales: [phone]
[phone]
Fax: [phone]
e-mail: [e-mail]
Dimensions are listed for reference purposes only.
Specifications and Availability subject to change without notice.
PTRH-T Rev K 3/31/2017
1 of 4