English
Language : 

PCS28 Datasheet, PDF (1/2 Pages) Picker Components – Dual Solid State Relay
Dual Solid State Relay
FEATURES
 Dual Solid State
 SCR Output
 Panel Mount
 Built in Snubber
 Opto-Isolation Between Input and Output
 RoHS Compliant
PCS28
E93379
INPUT PARAMETERS (Ta = 25°C)
Control Voltage Range
1D
2D
Must Turn-On Voltage
1D
2D
1D
Control Currentt
2D
4 - 15 VDC
15 - 32 VDC
4 VAC
15 VAC
8 - 50 mA
6 - 30 mA
Input Resistance
Must Turn-Off Voltage
1D
330 Ω
2D
1.5 kΩ
1 VDC
CHARACTERISTICS
4000 VAC, 50 Hz/60 Hz, 1 min. (Input to Output)
Dielectric Strength
2500 VAC, 50 Hz/60 Hz, 1 min.
(Input, Output to Output)
Insulation Resistance
1000 MΩ at 500 VDC
Operating Temperture
- 30°C to 80°C
Storage Temperature
- 30°C to 100°C
Weight
Approximately 83 g
OUTPUT PARAMETERS (Ta = 25°C)
-24, 25 -38, 25 -24, 40 -38, 40 -24, 50 -38, 50
Load Voltage Range
(VAC)
48-280 48-440 48-280 48-440 48-280 48-440
Max. Transient Voltage
(Vpk)
600
800
600
800
600
800
Load Current Range
0.1 - 25 A
0.1 - 40 A
0.1 - 50 A
Max. Surge Current
(10 ms)
300
400
500
Max. I2t (10 ms, A2s)
450
800
1250
Max. On-State Voltage
1.5 VRMS
Max. Off-State Leakage
Current
10 mA
Min. Off-State dv/dt
Max. Turn-On Time
Max. Turn-Off Time
Frequency Range
Min. Power Factor
500 V/us
Zero –Cross: 1/2 Cycles + 1 ms; Random: 1 ms
1/2 Cycles + 1 ms
47 - 63 Hz
0.5
PRECAUTIONS
1. Make sure that the polarity is correct when connecting, to avoid damage to the relay.
2. Apply heat-conducting silicon grease or a thermal transfer pad on the space between SSR and heat sink. Then, screw the heatsink firmly. In that
case, it would keep the SSR from damaging by overheat.
3. Install an adequate heatsink or take other effective cooling measures, when the relay is working. Please refer to the curve of Max. Load Current vs
Ambient Temperature.
4. Please do not use the relay beyond the descriptions in the data sheet.
ORDERING INFORMATION
Example:
PCS28 -12D -240A -2
Z
Model: PCS28
For Accessories and
Heat Sinks see page 2
Control Voltage: 12D: 9.6-14.4 VDC;
24D: 19.2– 28.8 VAC
Load Voltage: 240A: 48 - 280 VAC; 380A: 48 - 440 VAC
Load Current: 25: 25 A; 40: 40 A; 50: 50 A
Switching Type: Z: Zero Crossing; R: Random Turn-On
Box Quantity: 80; Inner Box 2
3220 Commander Drive, Suite 102 Carrollton, TX 75006
Sales: (972) 713-6272
(888) 997-3933
Fax: (972)735-0964
www.PickerComponents.com
e-mail: sales@pickercomponents.com
Dimensions are listed for reference purposes only.
PCS28 Rev A 8//4/15
Specifications and Availability subject to change without notice.
1 of 2