PC435_14 Datasheet, PDF (1/2 Pages) Picker Components – Subminature PCB Power Relay

Subminature PCB Power Relay
PC435
FEATURES
10 Amp continous contact capacity
1 Form A & 1 form C contact forms
Subminature design
Class "B" insulation standard
Sensitive version available
4 Kv dielectric between coil and contacts
8mm spacing between contacts and coil
Sealed, immersion cleanable
Lead Free & RoHS Compliant
File # E93379
UL/CUR RATINGS
Load Type
General Use
Motor
Tungsten Lamp
Normally Open Contact
10 Amps @ 125 VAC
5 Amps @ 250 VAC
5 Amps @ 30 VDC
4.2 Amps @ 277 VAC
1/4 HP @ 250 & 277 VAC
TV-5
Normally Closed Contact
5 Amps @ 125 VAC
3 Amps @ 250 VAC
3 Amps @ 30 VDC
2 Amps @ 277 VAC
CONTACT DATA
Material
AgCdO (Silver Cadmium Oxide)
Initial Contact Resistance
Mechanical
Service Life
Electrical
100 milliohms max @ 0.1A, 6VDC
1 X 10⁷ Operations
1 X 10⁵ Operations
CHARACTERISTICS
Operate Time
Release Time
Insulation Resistance
8 ms. Max.
5 ms. Max.
1000 megohms min, at 500VDC, 50%RH
Dielectric Strength
4000 Vrms, 1 min. between coil and contacts
1000 Vrms, 1 min. between open contacts
Shock Resistance
Vibration Resistance
Power Consumption
Ambient Temperature Range
Weight
10 g, 11ms, functional; 100 g, destructive
DA 1.6 mm, 10 - 55 Hz
.45 W
-40 to 70 C operating for class B, -40 to 130 C storage
7 grams approx.
ORDERING INFORMATION
Example: PC435 -1C -12
S F -H -X
Model
Contact Form 1A, 1C
Coil Voltage
Enclosure S: Sealed; C: Flux Free
Insulation System
Nil: Class B (125 degrees C), F: Class F (155 degrees C)
Coil Sensitivity
Nil: Standard .45 W, H: Sensitive .2 W
RoHS Compliant
Nil: Not Rohs, -X: RoHS Compliant
PC435 Rev F 7-1-10
3220 Commander Drive, Suite 102, Carrollton, Texas 75006
Sales: [phone] Fax: [phone] email: [e-mail] URL: pickercomponents.com
PAGE 1