HS-3511-05-0300 Datasheet, PDF (2/3 Pages) PIC GmbH – Various switching sensivity

HS-3511-05-0300
HS-3511-05-0300
Unipolar 2 - Wire
Flatpack Hall Effect Sensor
Characteristics
At recommended operation conditions if not otherwise specified in the column
"Conditions".
Typical characteristics for TJ = 25 °C and VSUP = 12 V
Symbol
Supply
ISUPIo
ISUPIo
ISUPhi
Output
tf
tf
td
tsamp
ten
Parameter
Low supply current
High supply current
Reverse current
Output fall time¹⁾
Output rise time
Delay time ¹⁾
Output refresh period
Enable time of output after settling of VSUP
wire colour Min. Typ. Max. Unit Conditions
red
2
red
12
red
5
mA
17
mA
1
mA for VSUP = - 18 V
1
µs
1) _{VSUP = 12 V;}
1
µs
16
µs
1.6
2
2.66
µs
50
µs VSUP = 12 V
B > Bon + 2 mT or B < Boff - 2 mT
Power-on-self-test
Self test can be triggered externally; details on request
1) _{Guaranteed by design}
Recommended Operating Conditions
Symbol Parameter
VSUP
Supply voltage
wire colour
red
Min. Max. Unit Conditions
3.0
24
V
Magnetic Characteristics Overview
Symbol Parameter
BONth
BOOth
Bth
TC
ON threshold range ¹⁾
OFF threshold range ¹⁾
Adjustable step size ²⁾
Temperatur compensation of
magnetic thresholds ³⁾
wire colour
-
-
-
-
1) _{Available range}
2) _{Small steps at small values, bigger steps at higher values. May not be undercut}
3) _{Different temperature compensation available on request}
Min. Typ. Max. Unit Conditions
-30
30
mT
-30
30
mT
0.5
mT
0
-3000
ppm/K
Page 2 of 3
Rev. 1.0, 03.11.2016, (006, 001, 009)
hs3511_05_0300_ds_e_1.0
PIC Proximity Instrumentation Controls
Kontaktbauelemente GmbH
Nibelungenstr. 5A
Phone [phone]
90530 Wendelstein, Germany Fax [phone]
[e-mail]
pic-gmbh.com