1411996 Datasheet, PDF (2/6 Pages) PHOENIX CONTACT – Flush-type connector - SACC-CIP-M12MS-4P SMD R32

https://www.phoenixcontact.com/us/products/1411996
Flush-type connector - SACC-CIP-M12MS-4P SMD R32 - 1411996
Technical data
General
Note
Rated current at 40°C
Rated voltage
Rated surge voltage
Number of positions
Insulation resistance
Coding
Standards/regulations
Overvoltage category
Degree of pollution
Connection method
Insertion/withdrawal cycles
Mounting type
Type of packaging
Delivery state
Material
Flammability rating according to UL 94
Contact material
Contact surface material
Contact carrier material
Sealing material
Cable
Standards/specifications
Standards and Regulations
Standard designation
Standards/regulations
Flammability rating according to UL 94
The electrical and mechanical data specified assume that the connector
pair is correctly locked and mounted. If the connector is unlocked and if
there is a danger of contamination, the connector must be sealed using
a protective cap > IP54. Influences arising from litz wires, cables or PCB
assembly must also be taken into consideration.
4A
250 V
2.5 kV
4
≥ 100 MΩ
A - standard
M12 connector IEC 61076-2-101 In line with
II
3
SMD
> 100
PCB mounting
Belt
with assembly pad
V0
CuZn
Au
PA
FKM
M12 connector IEC 61076-2-101 In line with
M12 connector
IEC 61076-2-101
V0
Drawings
08/05/2016 Page 2 / 6