1408415 Datasheet, PDF (2/5 Pages) PHOENIX CONTACT – Flush-type connector - SACC-E-M12MS-4CON-M20/0,5 VA

https://www.phoenixcontact.com/us/products/1408415
Flush-type connector - SACC-E-M12MS-4CON-M20/0,5 VA - 1408415
Technical data
General
Note
Rated current at 40°C
Rated voltage
Rated surge voltage
Number of positions
Insulation resistance
Coding
Standards/regulations
Overvoltage category
Degree of pollution
Connection method
Insertion/withdrawal cycles
Torque
Mounting type
Material
Flammability rating according to UL 94
Contact material
Contact surface material
Contact carrier material
Material, knurls
Cable
Cable type
Conductor cross section
AWG signal line
Conductor structure signal line
Core diameter including insulation
Thickness, insulation
Wire colors
Material conductor insulation
Conductor material
Standards/specifications
Insulation resistance
Conductor resistance
Nominal voltage, cable
The electrical and mechanical data specified assume that the connector
pair is correctly locked and mounted. If the connector is unlocked and if
there is a danger of contamination, the connector must be sealed using
a protective cap > IP54. Influences arising from litz wires, cables or PCB
assembly must also be taken into consideration.
4A
250 V
2.5 kV
4
≥ 100 MΩ
A - standard
M12 connector IEC 61076-2-101
II
3
Individual wires
> 100
3 Nm ... 4 Nm (Installation-side)
Front mounting M20 x 1,5
V0
CuZn
Au
PA 66
Stainless steel
TPE litz wire
0.34 mm²
22
7x 0.25 mm
1.2 mm ±0.07 mm
0.21 mm
brown, white, blue, black
TPE
Tin-plated Cu litz wires
M12 connector IEC 61076-2-101
≥ 20 MΩ*km
≤ 57.6 mΩ/m
300 V
08/02/2016 Page 2 / 5