5601742 Datasheet, PDF (1/2 Pages) PHOENIX CONTACT – UMK 45-RELAY High DC Current Relay Module

UMK 45-RELAY
High DC Current Relay Module
Data Sheet 1116B
March 2001
Features
• 45 mm wide (1.77")
• Pluggable base includes Potter & Brumfield
KUEP style relay
• Single Pole Single Throw (SPST) relay
• Double make contact
• DIN-rail mounted with universal foot
• Coil status indication
• Inductive kickback diode on DC version
• Separation of coil and contact wiring
Description
The UMK relays are industrial interface relays used in
applications where low level control signals must
switch high level dc loads. These relays are well
suited for switching either 48 V dc or 125 V dc used in
the power utility industry.
The UMK 45 RELAY provides a 1 pole double make
contact. This relay also incorporates a blow out
magnet for controlling high DC voltage switching.
Features incorporated into the pluggable base include
coil indication and inductive kickback protection diodes
for 24 V dc, 48 V dc and 125 V dc.
Figure 1. UMK 45-RELAY
Table 1. UMK 45-RELAY Specifications
Phoenix Contact Inc. • P.O. Box 4100 • Harrisburg, PA 17111 • Phone: [phone] • Fax: [phone]
1