2982689 Datasheet, PDF (1/4 Pages) PHOENIX CONTACT – Solid-State Relays

OV-24DC …
Solid-State Relays
INTERFACE
Data Sheet
103082_01_en
© PHOENIX CONTACT - 11/2006
Description
OV-24DC … solid-state relays for electrical isolation can be
mounted directly on the PCB as interfaces or plugged in
using the SIM-AMS socket, which can be soldered.
The solid-state relays are suitable for switching ohmic,
capacitive or inductive loads. Relays for switching AC
circuits have a zero point switch to switch on loads that are
in the zero voltage crossing. They are switched off in the
zero current crossing.
DC loads can switch up to 1 A at 350 V DC and up to 4 A at
60 V DC, while AC loads can switch up to 5 A at 480 V AC.
Inductive loads must be provided with an appropriate
protective circuit (e.g., free-wheeling diode or RC element).
The electronic load relays have the following advantages:
– No wear, even at high switching frequencies
– No contact bounce – no movable parts
– No electromagnetic interference
– Electrically insulated housing
– Compact dimensions
– High test voltage of up to 4 kV between control and load
circuits
Make sure you always use the latest documentation.
It can be downloaded at www.download.phoenixcontact.com.
A conversion table is available on the Internet at
www.download.phoenixcontact.com/general/7000_en_00.pdf.
This data sheet is valid for all products listed on the following page: