0912050 Datasheet, PDF (1/4 Pages) PHOENIX CONTACT – Electronic device circuit breaker - ECP-E3 10A

https://www.phoenixcontact.com/us/products/0912050
Electronic device circuit breaker - ECP-E3 10A - 0912050
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Electronic device circuit breaker, Number of positions: 1, Connection method: Screw connection, Width: 12.5 mm,
Fuse type: Electronic, Fuse type: Automatic device, Mounting type: On base element, Color: black
The figure shows the ECP-E3 1A
version
Why buy this product
■ ^{Includes the advantages of current limitation}
■ ^{Sufficient supply of all error-free load circuits}
■ ^{Output voltage of switched-mode power supply unit remains stable}
■ ^{In addition, the ECP-E2 can be controlled remotely by the control input (12), e.g., by means of a PLC}
■ ^{Application - all aspects of the switched-mode power supply unit}
■ ^{Responds faster than switched-mode power supply unit to overload and short circuit}
Key Commercial Data
Packing unit
Custom tariff number
Country of origin
Technical data
General
Installation instructions
Mounting type
Color
1 STK
85362010
Germany
When mounted in rows without convection cooling, the nominal device
current should only be led to a maximum of 80% due to the thermal effect
during continuous operation (100% operating factor).
Special precautionary measures must be taken in systems or machines, to
prevent components from restarting (e.g., use of a safety PLC).
Parallel connection of multiple circuit breakers is not permitted.
On base element
black
08/01/2016 Page 1 / 4