TDA8928J Datasheet, PDF(9/23 Page) NXP Semiconductors – Power stage 2 x 10 or 1 x 20 W class-D audio amplifie

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

TDA8928J Datasheet, PDF (9/23 Pages) NXP Semiconductors – Power stage 2 x 10 or 1 x 20 W class-D audio amplifie

◁

Philips Semiconductors

Power stage 2 x 10 or 1 x 20 W class-D

audio ampliï¬er

Preliminary speciï¬cation

TDA8928J

13 AC CHARACTERISTICS

VP = Â±12.5 V; Tamb = 25 Â°C; unless otherwise speciï¬ed.

SYMBOL

PARAMETER

CONDITIONS

MIN. TYP. MAX. UNIT

Single-ended application; note 1

output power

THD

Î·

total harmonic distortion

efï¬ciency endstage

RL = 8 â¦

THD = 0.5 %

7(2)

THD = 10 %

9(2)

RL = 16 â¦

THD = 0.5 %

THD = 10 %

Po = 1 W; note 3

fi = 1 kHz

fi = 10 kHz

Po = 2 Ã 10 W; fi = 1 kHz; note 4 â

0.05 0.1 %

0.2 â

Notes

1. VP = Â±12.5 V; RL = 8 â¦; fi = 1 kHz; fosc = 310 kHz; Rs = 0.1 â¦ (series resistance of filter coil); Tamb = 25 Â°C;

measured in reference design (SE application) shown in Fig.5; unless otherwise specified.

2. Indirectly measured; based on Rds(on) measurement.

3. Total Harmonic Distortion (THD) is measured in a bandwidth of 22 Hz to 20 kHz (AES 17 brickwall filter). When

distortion is measured using a low-order low-pass filter a significantly higher value will be found, due to the switching

frequency outside the audio band. Measured using the typical application circuit, given in Fig.5.

4. Efficiency for power stage.

2004 May 05

▷