|
TDA8551 Datasheet, PDF (9/20 Pages) NXP Semiconductors – 1 W BTL audio amplifier with digital volume control | |||
|
◁ |
Philips Semiconductors
1 W BTL audio ampliï¬er with digital volume control
When a practical PCB layout is used with wider copper
tracks and some extra copper added both to the IC pin
connections and underneath the IC, the thermal resistance
from junction to ambient can be reduced. Without these
measures Rth j-a = 160 K/W for the SO8 package; see
Chapter âThermal characteristicsâ. The power dissipation
can be calculated as follows:
P = R-T----at-h--m--j---b-a
For a maximum ambient temperature of 50 °C, VP = 5 V
and RL = 8 ⦠this results in a worst case sine wave
dissipation of 0.63 W.
handbook,1h0alfpage
IP
(mA)
8
6
4
Figures 5 to 15 represent test results obtained while using
the test circuit given in Fig.4. The following test conditions
2
apply: Tamb = 25 °C; VP = 5 V; f = 1 kHz; RL = 8 â¦;
Gv = 20 dB; audio bandwidth from 22 Hz to 22 kHz
(except for Figs 8 and 9); unless otherwise specified.
0
0
2
Product speciï¬cation
TDA8551
MGM554
4 VP (V) 6
Fig.5 Supply current as a function of supply
voltage.
10
handbook, halfpage
THD
(%)
1
10â1
10â2
10â2
(1)
(2)
(3)
10â1
MGM551
1 Po (W) 10
(1) f = 10 kHz.
(2) f = 1 kHz.
(3) f = 100 Hz.
Fig.6 Total harmonic distortion as a function of
output power at different frequencies.
10
handbook, halfpage
THD
(%)
1
10â1
MGM552
(1)
(2)
(3)
10â2
10â2
10â1
1 Po (W) 10
f = 1 kHz.
(1) Gv = 0 dB.
(2) Gv = 7 dB.
(3) Gv = 20 dB.
Fig.7 Total harmonic distortion as a function of
output power at different gains.
1998 Feb 23
9
|
▷ |