|
SAA7152 Datasheet, PDF (8/15 Pages) NXP Semiconductors – Digital Video Comb Filter DCF | |||
|
◁ |
Philips Semiconductors
Digital Video Comb Filter (DCF)
Product speciï¬cation
SAA7152
Table 1 I2C-bus; subaddress and data bytes for writing (after X = 0 in address byte)
FUNCTION
SUBADDRESS
Controls
00
D7
BYPS
D6
CSEL
DATA
D5
D4
D3
CCMB YCMB TAPS
D2
D1
CFRQ NLIN
D0
LLEN
Function of the bits of Table 1:
BYPS
CSEL
CCMB
YCMB
TAPS
CFRQ
NLIN
LLEN
Select bypass with a short delay; all other 0 = no bypass
functions are disabled:
1 = comb ï¬lter bypassed (delay is 3 LLC)
Input mode select:
0 = CVBS selected
1 = Y/C selected
Select comb ï¬ltering
0 = chrominance is bandpassed
1 = chrominance is comb-ï¬ltered
Enable chrominance substruction from
CVBS signal:
0 = disabled, CVBS/Y signal is only low-passed
1 = enabled (chrominance trap or comb ï¬ltering)
Selects tap for switching Y and C to
adder:
0 = for bandpass/low-pass combination
1 = for comb ï¬lter active
Select centre frequency and matching
factor of chrominance ï¬lter:
0 = 4.43 MHz
1 = 3.58 MHz
Select delay (number of lines):
0 = 4-line comb ï¬lter for standard PAL
1 = 2-line ï¬lter for standard NTSC
Selects the number of clocks for each
line delay:
0 = 1728 clocks (625 lines; 50 Hz)
1 = 1716 clocks (525 lines; 60 Hz)
August 1996
8
|
▷ |