74HC_HCT4067_15 Datasheet, PDF (7/28 Pages) NXP Semiconductors – 16-channel analog multiplexer/demultiplexer

NXP Semiconductors
74HC4067; 74HCT4067
16-channel analog multiplexer/demultiplexer
Table 4. Limiting values …continued
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min
Max Unit
P_tot
total power dissipation
T_amb = 40 C to +125 C
SO24 package
[2]
-
500 mW
SSOP24 package
[3]
-
500 mW
TSSOP24 package
[3]
-
500 mW
DHVQFN24 package
[4]
-
500 mW
P
power dissipation
per switch
-
100 mW
[1] To avoid drawing V_CC current out of terminal Z, when switch current flows in terminals Yn, the voltage drop across the bidirectional
switch must not exceed 0.4 V. If the switch current flows into terminal Z, no V_CC current will flow out of terminals Yn. In this case there is
no limit for the voltage drop across the switch, but the voltages at Yn and Z may not exceed V_CC or GND.
[2] For SO24 package: P_tot derates linearly with 8 mW/K above 70 C.
[3] For SSOP24 and TSSOP24 packages: P_tot derates linearly with 5.5 mW/K above 60 C.
[4] For DHVQFN24 package: P_tot derates linearly with 4.5 mW/K above 60 C.
9. Recommended operating conditions
Table 5. Recommended operating conditions
Symbol Parameter
Conditions
74HC4067
V_CC
V_I
V_SW
t/V
supply voltage
input voltage
switch voltage
input transition rise and fall rate
T_amb
ambient temperature
74HCT4067
V_CC = 2.0 V
V_CC = 4.5 V
V_CC = 6.0 V
V_CC = 10.0 V
V_CC
V_I
V_SW
t/V
T_amb
supply voltage
input voltage
switch voltage
input transition rise and fall rate
ambient temperature
V_CC = 4.5 V
Min
Typ
Max Unit
2.0
GND
GND
-
-
-
-
40
5.0
-
-
-
1.67
-
-
+25
10.0 V
V_CC V
V_CC V
625 ns
139 ns
83 ns
31 ns
+125 C
4.5
GND
GND
-
40
5.0
-
-
1.67
+25
5.5 V
V_CC V
V_CC V
139 ns
+125 C
74HC_HCT4067
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 22 May 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
7 of 28