74AUP1G17_15 Datasheet, PDF (7/24 Pages) NXP Semiconductors – Low-power Schmitt trigger

NXP Semiconductors
74AUP1G17
Low-power Schmitt trigger
Table 7. Static characteristics …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min
I_OFF additional power-off leakage V_I or V_O = 0 V to 3.6 V;
-
current
V_CC = 0 V to 0.2 V
I_CC
supply current
V_I = GND or V_CC; I_O = 0 A;
-
V_CC = 0.8 V to 3.6 V
I_CC
additional supply current
V_I = V_CC  0.6 V; I_O = 0 A;
-
V_CC = 3.3 V
11. Dynamic characteristics
Typ
Max Unit
-
0.75 A
-
1.4 A
-
75 A
Table 8. Dynamic characteristics
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 9
Symbol Parameter
Conditions
25 C
Min Typ^[1] Max
C_L = 5 pF
t_pd
propagation delay
C_L = 10 pF
t_pd
propagation delay
C_L = 15 pF
t_pd
propagation delay
A to Y; see Figure 8
V_CC = 0.8 V
V_CC = 1.1 V to 1.3 V
V_CC = 1.4 V to 1.6 V
V_CC = 1.65 V to 1.95 V
V_CC = 2.3 V to 2.7 V
V_CC = 3.0 V to 3.6 V
A to Y; see Figure 8
V_CC = 0.8 V
V_CC = 1.1 V to 1.3 V
V_CC = 1.4 V to 1.6 V
V_CC = 1.65 V to 1.95 V
V_CC = 2.3 V to 2.7 V
V_CC = 3.0 V to 3.6 V
A to Y; see Figure 8
V_CC = 0.8 V
V_CC = 1.1 V to 1.3 V
V_CC = 1.4 V to 1.6 V
V_CC = 1.65 V to 1.95 V
V_CC = 2.3 V to 2.7 V
V_CC = 3.0 V to 3.6 V
[2]
-
2.6
2.4
2.0
1.9
1.8
19.0 -
5.7 10.6
4.2 6.5
3.6 5.5
3.0 4.2
2.7 3.6
[2]
-
2.9
2.6
2.5
2.3
2.1
22.5 -
6.6 12.4
4.8 7.8
4.2 6.3
3.5 4.8
3.3 4.4
[2]
-
3.2
3.1
2.7
2.6
2.5
26.0 -
7.4 14.1
5.4 8.7
4.7 7.1
4.0 5.6
3.7 4.9
40 C to +125 C
Unit
Min Max
Max
(85 C) (125 C)
-
-
2.5 10.9
2.3 7.1
1.9 6.1
1.8 4.6
1.5 3.8
-
ns
11.1 ns
7.4 ns
6.3 ns
4.8 ns
4.0 ns
-
-
2.7 12.9
2.4 8.3
2.4 6.8
2.1 5.3
2.0 4.6
-
ns
13.0 ns
8.7 ns
7.1 ns
5.6 ns
4.8 ns
-
-
3.1 14.7
2.8 9.5
2.7 7.8
2.5 6.0
2.2 5.2
-
ns
14.9 ns
9.9 ns
8.2 ns
6.3 ns
5.5 ns
74AUP1G17
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 8 — 15 January 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
7 of 24