74ABT162244_15 Datasheet, PDF(6/15 Page) NXP Semiconductors – 16-bit buffer/line driver with 30  series termination resistors; 3-state

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

74ABT162244_15 Datasheet, PDF (6/15 Pages) NXP Semiconductors – 16-bit buffer/line driver with 30  series termination resistors; 3-state

◁

NXP Semiconductors

74ABT162244

16-bit buffer/line driver with 30 ï series termination resistors; 3-state

9. Static characteristics

Table 6. Static characteristics

Symbol Parameter

Conditions

25 ï°C

ï40 ï°C to +85 ï°C Unit

Min Typ Max Min Max

VIK

input clamping voltage VCC = 4.5 V; IIK = ï18 mA

VOH

HIGH-level output

VI = VIL or VIH

voltage

VCC = 4.5 V; IOH = ï3 mA

VCC = 5.0 V; IOH = ï3 mA

VCC = 4.5 V; IOH = ï32 mA

VOL

LOW-level output

VI = VIL or VIH

voltage

VCC = 4.5 V; IOL = 8 mA

VCC = 4.5 V; IOL = 12 mA

input leakage current VCC = 5.5 V; VI = VCC or GND

IOFF

power-off leakage

VCC = 0 V; VI or VO ï£ 4.5 V

current

- ï0.9 ï1.2 -

ï1.2 V

2.5 2.9 -

2.5

3.0 3.4 -

3.0

2.0 2.4 -

2.0

- 0.65 -

- 0.80 -

- ï±0.01 ï±1.0 -

- ï±5.0 ï±100 -

0.65 V

0.80 V

ï±1.0 ïA

ï±100 ïA

IO(pu/pd)

IOZ

ILO

ICC

power-up/power-down VCC = 2.0 V; VO = 0.5 V;

output current

VI = GND or VCC; nOE = HIGH

OFF-state output

current

VCC = 5.5 V; VI = VIL or VIH

output HIGH-state at VO = 5.5 V

output LOW-state at VO = 0 V

output leakage current HIGH-state; VO = 5.5 V;

VCC = 5.5 V; VI = GND or VCC

output current

VCC = 5.5 V; VO = 2.5 V

supply current

VCC = 5.5 V; VI = GND or VCC

outputs HIGH-state

[1] - ï±5.0 ï±50

- 0.1 10

- ï0.1 ï10

- 5.0 50

[2] ï50 ï100 ï180 ï50

- 0.50 1.0

ï±50 ïA

10 ïA

ï10 ïA

50 ïA

ï180 mA

1.0 mA

outputs LOW-state

- 10 19

19 mA

outputs 3-state

- 0.50 1.0

1.0 mA

ïICC

additional supply

current

per input pin; VCC = 5.5 V; one input [3][4] - 100 250

at 3.4 V and other inputs at VCC or

GND

250 ïA

input capacitance

VI = 0 V or VCC

CI/O

input/output

capacitance

outputs disabled; VO = 0 V or VCC

[1] This parameter is valid for any VCC between 0 V and 2.1 V, with a transition time of up to 10 ms. From VCC = 2.1 V to VCC = 5 V ï± 10 %,

a transition time of up to 100 ïs is permitted.

[2] Not more than one output should be tested at a time, and the duration of the test should not exceed one second.

[3] This is the increase in supply current for each input at 3.4 V.

[4] This data sheet limit may vary among suppliers.

74ABT162244

Product data sheet

All information provided in this document is subject to legal disclaimers.

Rev. 6 â 3 November 2011

6 of 15

▷