TDA6111Q Datasheet, PDF (5/16 Pages) NXP Semiconductors – Video output amplifier

Philips Semiconductors
Video output amplifier
Preliminary specification
TDA6111Q
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134). Voltages measured with respect to GND (pin 4);
currents as specified in Fig.1; unless otherwise specified.
SYMBOL
V_DDH
V_DDL
V_I
V_Idm
V_om
V_oc
V_fb
I_in,I_ip
I_ocsmL
I_ocsmH
P_tot
T_stg
T_j
V_es
PARAMETER
high level supply voltage
low level supply voltage
input voltage
differential mode input voltage
measurement output voltage
cathode output voltage
feedback output voltage
input current
low non-repetitive peak cathode
output current
high non-repetitive peak cathode
output current
total power dissipation
storage temperature
junction temperature
electrostatic handling
human body model (HBM)
machine model (MM)
CONDITIONS
flashover discharge = 100 µC
MIN.
0
0
0
−6
0
V_DDL
V_DDL
0
0
MAX.
250
14
V_DDL
+6
V_DDL
V_DDH
V_DDH
1
5
UNIT
V
V
V
V
V
V
mA
A
flashover discharge = 100 nC 0
10
A
0
4
W
−55
+150 °C
−20
+150 °C
−
> 1500 V
−
> 400 V
HANDLING
Inputs and outputs are protected against electrostatic discharge in normal handling. However, to be totally safe, it is
desirable to take normal precautions appropriate to handling MOS devices (see “Handling MOS Devices” ).
QUALITY SPECIFICATION
Quality specification “SNW-FQ-611 part E” is applicable, except for ESD Human body model see Chapter “Limiting
values”, and can be found in the “Quality reference handbook” (ordering number 9398 510 63011).
THERMAL CHARACTERISTICS
SYMBOL
PARAMETER
R_{th j-c}
thermal resistance from junction to case (note 1)
Note
1. External heatsink is required.
VALUE
12
UNIT
K/W
1995 Feb 07
5