TDA6103Q Datasheet, PDF (5/16 Pages) NXP Semiconductors – Triple video output amplifier

Philips Semiconductors
Triple video output amplifier
Preliminary specification
TDA6103Q
CHARACTERISTICS
Operating range: T_j = −20 to 150 °C; V_DD = 180 to 210 V; V_ip = 1 to 4 V.
Test conditions (unless otherwise specified): T_amb = 25 °C; V_DD = 200 V; V_ip = 1.3 V; V_oc1 = V_oc2 = V_oc3 = ¹â„₂V_DD;
C_L = 10 pF (C_L consists of parasitic and cathode capacitance); R_{th h-a} = 18 K/W; measured in test circuit Fig.5.
SYMBOL
PARAMETER
CONDITIONS
MIN.
TYP.
MAX. UNIT
I_DD
quiescent supply current
I_bias
input bias current inverting inputs
(pins 1, 2 and 3)
7.0
9.25
11.5
−5
−1
+1
I_bias
input bias current non-inverting
input (pin 5)
−15
−3
+1
V_i(offset) input offset voltage
(pins 1, 2 and 3)
−50
−
+50
∆V_i(offset) differential input offset voltage
temperature drift between pins 1
and 5; 2 and 5; 3 and 5
−
tbf
−
C_icm
common-mode input capacitance
(pins 1, 2 and 3)
−
5
−
C_icm
common-mode input capacitance
(pin 5)
−
10
−
C_idm
differential mode input capacitance
between 1 and 5; 2 and 5; 3 and 5
−
1
−
V_oc(min) minimum output voltage
(pins 7, 8 and 9)
V_1−5 = V_2−5 = V_3−5 = −1 V −
5
10
V_oc(max) maximum output voltage
(pins 7, 8 and 9)
V_1−5 = V_2−5 = V_3−5 = 1 V; V_DD − 10 V_DD − 6 −
note 1
GB
gain-bandwidth product of
open-loop gain:
V_{oc1, 2, 3} / V_{i1-5, 2-5, 3-5}
B_S
small signal bandwidth
(pins 7, 8 and 9)
f = 500 kHz
V_oc(p-p) = 60 V
−
0.75
−
6
7.5
−
B_L
large signal bandwidth
(pins 7, 8 and 9)
V_oc(p-p) = 100 V
5
7
−
t_pd
cathode output propagation delay V_oc(p-p) = 100 V square
−
time 50% input to 50% output
wave; f < 1 MHz;
(pins 7, 8 and 9)
t_r = t_f = 40 ns (pins 1, 2
and 3); see Figs 7 and 8
38
−
∆t_p
difference in cathode output
V_oc(p-p) = 100 V square
−10
0
+10
propagation time 50% input to
wave; f < 1 MHz;
50% output (pins 7 and 8, 7 and 9 t_r = t_f = 40 ns (pins 1, 2
and 8 and 9)
and 3)
t_r
cathode output rise time 10%
V_oc = 50 to 150 V square 48
60
73
output to 90% output
wave; f < 1 MHz; t_f = 40 ns
(pins 7, 8 and 9)
(pins 1, 2 and 3); see Fig.7
t_f
cathode output fall time 90% output V_o = 150 to 50 V square 48
60
73
to 10% output (pins 7, 8 and 9)
wave; f < 1 MHz; t_r = 40 ns
(pins 1, 2 and 3); see Fig.8
mA
µA
µA
mV
mV/K
pF
pF
pF
V
V
GHz
MHz
MHz
ns
ns
ns
ns
March 1994
5