SA602A_15 Datasheet, PDF (5/19 Pages) NXP Semiconductors – Double-balanced mixer and oscillator

NXP Semiconductors
SA602A
Double-balanced mixer and oscillator
SA602A
SA602A
SA602A
input
aaa-013216
aaa-013217
aaa-013218
a. Single-ended
tuned input
Fig 4. Input configuration
b. Balanced input
(for attenuation of
second-order
products)
c. Single-ended
untuned input
The mixer outputs (OUT_A and OUT_B pins) are also internally biased. Each output is
connected to the internal positive supply by a 1.5 k resistor. This permits direct output
termination yet allows for balanced output as well. Figure 5 shows three single-ended
output configurations and a balanced output.
SA602A
aaa-013219
a. Single-ended ceramic filter
SA602A
b. Single-ended crystal filter
aaa-013220
SA602A
c. Single-ended IFT
Fig 5. Output configuration
aaa-013221
SA602A
d. Balanced output
aaa-013222
SA602A
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 27 May 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
5 of 19