TZA3015HW Datasheet, PDF (49/67 Pages) NXP Semiconductors – 30 Mbit/s to 3.2 Gbit/s A-rate 4-bit fibre optic transceiver

Philips Semiconductors
30 Mbit/s to 3.2 Gbit/s A-rate™
4-bit fibre optic transceiver
Preliminary specification
TZA3015HW
CHARACTERISTICS
V_CCA = V_CCD = V_CCO = 3.14 to 3.46 V; T_amb = −40 to +85 °C; R_th(j-a) < 16 K/W; all characteristics are specified for the
default test settings (see Table 60); all voltages are referenced to V_EE; positive currents flow into the device; unless
otherwise specified.
SYMBOL PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNIT
Supplies
I_CCA
analog supply
current
13
21
29
mA
I_CCD
digital supply
notes 1 and 2
350
395
456
mA
current
I_DD
digital supply
current
0
0.3
1
mA
I_CCO
supply current for
clock generator
41
55
64
mA
I_CC(tot)
total supply
notes 1 and 2
404
471
550
mA
current
P_tot
total power
notes 1 and 2
1.3
1.6
1.8
W
dissipation
CMOS inputs: pins UI, CS, DR0 to DR2, LM0 to LM2, ENRX, ENTX, PAREVEN, WINSIZE, LOWSWING, FREF0,
FREF1, ENBA, FIFORESET, CLKDIR, ENTXSC and ENDDR
V_IL
LOW-level input
voltage
−
−
0.2V_CC
V
V_IH
HIGH-level input
voltage
0.8V_CC
−
−
V
I_IL
LOW-level input V_IL = 0 V
current
−200
−
−
µA
I_IH
HIGH-level input V_IH = V_CC
current
−
−
10
µA
CMOS outputs: pins LOS, INT, INWINDOW, LOL and OVERFLOW
V_OL
LOW-level output I_OL = 1 mA
voltage
0
−
V_OH
HIGH-level output I_OH = −0.5 mA
voltage
V_CC − 0.2 −
0.2
V
V_CC
V
Open-drain output: pin INT
V_OL
LOW-level output I_OL = 1 mA
voltage
0
−
0.2
V
I_OH
HIGH-level output V_OH = V_CC
current
−
−
10
µA
Serial outputs: pins TXSD(Q) and TXSC(Q)
V_o(p-p)
default output
single-ended with 50 Ω 220
300
380
mV
voltage swing
external load; DC swing;
(peak-to-peak
note 3
value)
Z_o
output impedance single-ended to V_CC
40
50
60
Ω
t_r
rise time
20% to 80%
−
60
90
ps
2003 Dec 16
49