74HC2G17 Datasheet, PDF (4/18 Pages) NXP Semiconductors – Dual non-inverting Schmitt trigger

NXP Semiconductors
74HC2G17; 74HCT2G17
Dual non-inverting Schmitt trigger
9. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min Max Unit
V_CC
I_IK
I_OK
I_O
I_CC
I_GND
T_stg
P_tot
supply voltage
input clamping current
output clamping current
output current
supply current
ground current
storage temperature
total power dissipation
V_I < −0.5 V or V_I > V_CC + 0.5 V
V_O < −0.5 V or V_O > V_CC + 0.5 V
V_O = −0.5 V to V_CC + 0.5 V
−0.5
[1] _-
[1] _-
[1] _-
[1] _-
[1] _-
−65
[2] _-
+7.0 V
±20 mA
±20 mA
±25 mA
50 mA
−50 mA
+150 °C
250 mW
[1] The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For SC-88 and SC-74 packages: above 87.5 °C the value of P_tot derates linearly with 4.0 mW/K.
10. Recommended operating conditions
Table 6. Recommended operating conditions
Symbol
Parameter
Type 74HC2G17
V_CC
supply voltage
V_I
input voltage
V_O
output voltage
T_amb
ambient temperature
Type 74HCT2G17
V_CC
V_I
V_O
T_amb
supply voltage
input voltage
output voltage
ambient temperature
Conditions
11. Static characteristics
Min Typ Max Unit
2.0 5.0 6.0 V
0
-
V_CC
V
0
-
V_CC
V
−40 +25 +125 °C
4.5 5.0 5.5 V
0
-
V_CC
V
0
-
V_CC
V
−40 +25 +125 °C
Table 7. Static characteristics for 74HC2G17
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min
Typ
Max
Unit
T_amb = 25 °C
V_OH
HIGH-level output voltage
V_I = V_IH or V_IL
I_O = −20 µA; V_CC = 2.0 V
I_O = −20 µA; V_CC = 4.5 V
I_O = −20 µA; V_CC = 6.0 V
I_O = −4.0 mA; V_CC = 4.5 V
I_O = −5.2 mA; V_CC = 6.0 V
1.9
2.0
-
V
4.4
4.5
-
V
5.9
6.0
-
V
4.18
4.32
-
V
5.68
5.81
-
V
74HC_HCT2G17_1
Product data sheet
Rev. 01 — 6 October 2006
© NXP B.V. 2006. All rights reserved.
4 of 18