74F805 Datasheet, PDF (4/8 Pages) NXP Semiconductors – Hex 2-input NOR drivers

Philips Semiconductors
Hex 2-input NOR drivers
Product specification
74F805/74F1805
ABSOLUTE MAXIMUM RATINGS
(Operation beyond the limit set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the
operating free air temperature range.)
SYMBOL
PARAMETER
RATING
UNIT
V_CC
V_IN
I_IN
V_OUT
Supply voltage
Input voltage
Input current
Voltage applied to output in high output state
–0.5 to +7.0
V
–0.5 to +7.0
V
–30 to +5
mA
–0.5 to V_CC
V
I_OUT
Current applied to output in low output state
96
mA
T_amb
T_stg
Operating free air temperature range
Storage temperature range
0 to +70
°C
–65 to +150
°C
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
V_CC
V_IH
V_IL
I_Ik
I_OH
I_OL
T_amb
Supply voltage
High–level input voltage
Low–level input voltage
Input clamp current
High–level output current
Low–level output current
Operating free air temperature range
LIMITS
UNIT
MIN
NOM
MAX
4.5
5.0
5.5
V
2.0
V
0.8
V
–18
mA
–48
mA
48
mA
0
+70
°C
DC ELECTRICAL CHARACTERISTICS
(Over recommended operating free-air temperature range unless otherwise noted.)
SYMBOL
PARAMETER
TEST CONDITIONS¹
LIMITS
UNIT
MIN TYP² MAX
V_OH
High-level output voltage
V_CC = MIN, V_IL = MAX
±10%V_CC
2.0
V
V_IH = MIN, I_OH = MAX
±5%V_CC
2.0
V
V_OL
Low-level output voltage
V_CC = MIN, V_IL = MAX
V_IH = MIN, I_Ol = MAX
±10%V_CC
±5%V_CC
0.38 0.55
V
0.38 0.55
V
V_IK
Input clamp voltage
V_CC = MIN, I_I = I_IK
-0.73 -1.2
V
I_I
Input current at maximum input voltage V_CC = MAX, V_I = 7.0V
100
µA
I_IH
High–level input current
V_CC = MAX, V_I = 2.7V
20
µA
I_IL
Low–level input current
V_CC = MAX, V_I = 0.5V
-20
µA
I_O
Output current³
V_CC = MAX
-60
-150 mA
I_CC
Supply current (total)
I_CCH V_CC = MAX
V_IN = GND
3.0
5.0
mA
I_CCL
V_IN = 4.5V
17
25
mA
NOTES:
1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type.
2. All typical values are at V_CC = 5V, T_amb = 25°C.
3. The output conditions have been chosen to produce a current that closely approximates one half of the true short–circuit output current, I_OS.
September 14, 1990
4