74AUP2G125_15 Datasheet, PDF (4/24 Pages) NXP Semiconductors – Low-power dual buffer/line driver; 3-state

NXP Semiconductors
74AUP2G125
Low-power dual buffer/line driver; 3-state
6.2 Pin description
Table 3. Pin description
Symbol
Pin
SOT765-1, SOT833-1, SOT1089, SOT996-2,
SOT1116 and SOT1203
1OE, 2OE 1, 7
1A, 2A
2, 5
GND
4
1Y, 2Y
6, 3
V_CC
8
7. Functional description
SOT902-2
7, 1
6, 3
4
2, 5
8
Description
output enable input (active LOW)
data input
ground (0 V)
data output
supply voltage
Table 4. Function table^[1]
Input
nOE
nA
L
L
L
H
H
X
[1] H = HIGH voltage level;
L = LOW voltage level;
X = don’t care;
Z = high-impedance OFF-state.
8. Limiting values
Output
nY
L
H
Z
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min
Max
Unit
V_CC
I_IK
V_I
I_OK
V_O
I_O
I_CC
I_GND
T_stg
P_tot
supply voltage
input clamping current V_I < 0 V
input voltage
output clamping current V_O < 0 V
output voltage
Active mode and Power-down mode
output current
supply current
V_O = 0 V to V_CC
ground current
storage temperature
total power dissipation T_amb = 40 C to +125 C
0.5
50
[1] _0.5
50
[1] _0.5
-
-
50
65
[2] _-
+4.6
V
-
mA
+4.6
V
-
mA
+4.6
V
20
mA
50
mA
-
mA
+150
C
250
mW
[1] The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For VSSOP8 packages: above 110 C the value of P_tot derates linearly with 8.0 mW/K.
For XSON8 and XQFN8 packages: above 118 C the value of P_tot derates linearly with 7.8 mW/K.
74AUP2G125
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 10 — 8 February 2013
© NXP B.V. 2013. All rights reserved.
4 of 24