|
PCF2113X Datasheet, PDF (3/72 Pages) NXP Semiconductors – LCD controllers/drivers | |||
|
◁ |
Philips Semiconductors
LCD controllers/drivers
Product speciï¬cation
PCF2113x
1 FEATURES
⢠Single-chip LCD controller/driver
⢠2-line display of up to 12 characters + 120 icons, or
1-line display of up to 24 characters + 120 icons
⢠5 à 7 character format plus cursor; 5 à 8 for kana
(Japanese) and user defined symbols
⢠Icon mode: reduced current consumption while
displaying
⢠Icon blink function
⢠On-chip:
â Configurable 4, 3 or 2 voltage multiplier generating
LCD supply voltage, independent of VDD,
programmable by instruction (external supply also
possible)
â Temperature compensation of on-chip generated
VLCD: â0.16 to â0.24 %/K (programmable by
instruction)
â Generation of intermediate LCD bias voltages
â Oscillator requires no external components
(external clock also possible).
⢠Display data RAM: 80 characters
⢠Character generator ROM: 240, 5 à 8 characters
⢠Character generator RAM: 16, 5 à 8 characters;
3 characters used to drive 120 icons, 6 characters used
if icon blink feature is used in application
⢠4 or 8-bit parallel bus and 2-wire I2C-bus interface
⢠CMOS compatible
⢠18 row and 60 column outputs
⢠Multiplex rates 1 : 18 (for normal operation), 1 : 9 (for
single line operation) and 1 : 2 (for icon only mode)
⢠Uses common 11 code instruction set (extended)
⢠Logic supply voltage range VDD1 â VSS1 = 1.8 to 5.5 V
(chip may be driven with two battery cells)
⢠VLCD generator supply voltage range
VDD2 â VSS2 = 2.2 to 4.0 V
⢠Display supply voltage range VLCD â VSS2 = 2.2 to 6.5 V
⢠Direct mode to save current consumption for icon mode
and Mux 1 : 9 (depending on VDD2 value and LCD liquid
properties)
⢠Very low current consumption (20 to 200 µA):
â Icon mode: <25 µA
â Power-down mode: <2 µA.
1.1 Note
Icon mode is used to save current. When only icons are
displayed, a much lower operating voltage VLCD can be
used and the switching frequency of the LCD outputs is
reduced. In most applications it is possible to use VDD as
VLCD.
2 APPLICATIONS
⢠Telecom equipment
⢠Portable instruments
⢠Point-of-sale terminals.
3 GENERAL DESCRIPTION
The PCF2113x is a low power CMOS LCD controller and
driver, designed to drive a dot matrix LCD display of 2-line
by 12 or 1-line by 24 characters with 5 Ã 8 dot format.
All necessary functions for the display are provided in a
single chip, including on-chip generation of LCD bias
voltages, resulting in a minimum of external components
and lower system current consumption. The PCF2113x
interfaces to most microcontrollers via a 4 or 8-bit bus or
via the 2-wire I2C-bus. The chip contains a character
generator and displays alphanumeric and kana
(Japanese) characters. The letter âxâ in PCF2113x
characterizes the built-in character set. Various character
sets can be manufactured on request.
2001 Dec 19
3
|
▷ |