ISP1122 Datasheet, PDF (3/48 Pages) NXP Semiconductors – Universal Serial Bus stand-alone hub

Philips Semiconductors
5. Pinning information
5.1 ISP1122D (SO32) and ISP1122NB (SDIP32)
5.1.1 Pinning
ISP1122
USB stand-alone hub
handbook, halfpage
Vreg(3.3) ₁
PSW2/GL2 2
GND 3
DM3 4
DP3 5
VCC ₆
OC1 7
OC2 8
OC3 9
OC4 10
OC5/GOC 11
DM4 12
DP4 13
SP/BP 14
HUBGL 15
PSW3/GL3 16
32 PSW1/GL1
31 DP2
30 DM2
29 DP0
28 DM0
27 DP1
26 DM1
25 DP5
ISP1122D
24 DM5
23 INDV/SDA
22 OPTION/SCL
21 RESET
20 XTAL2
19 XTAL1
18 PSW5/GL5/GPSW
17 PSW4/GL4
MGR772
Fig 2. Pin configuration SO32.
handbook, halfpage
Vreg(3.3) ₁
32 PSW1/GL1
PSW2/GL2 2
31 DP2
GND 3
30 DM2
DM3 4
29 DP0
DP3 5
VCC ₆
28 DM0
27 DP1
OC1 7
26 DM1
OC2 8
25 DP5
ISP1122NB
OC3 9
24 DM5
OC4 10
23 INDV/SDA
OC5/GOC 11
22 OPTION/SCL
DM4 12
21 RESET
DP4 13
20 XTAL2
SP/BP 14
19 XTAL1
HUBGL 15
18 PSW5/GL5/GPSW
PSW3/GL3 16
17 PSW4/GL4
MGR773
Fig 3. Pin configuration SDIP32.
5.1.2 Pin description
Table 2: Pin description for SO32 and SDIP32
Symbol ^[1]
Pin Type Description
V_reg(3.3) ^[2]
1
-
regulated supply voltage (3.3 V ± 10%) from internal
regulator; used to connect pull-up resistor on DP0 line
PSW2/GL2 ^[3] 2
O
modes 4 to 6: power switch control output for downstream
port 2 (open-drain, 6 mA)
modes 0 to 3, 7: GoodLink LED indicator output for
downstream port 2 (open-drain, 6 mA); to connect an LED
use a 330 Ω series resistor
GND
3
-
ground supply
DM3
4
AI/O downstream port 3 D− connection (analog) ^[4]
DP3
5
AI/O downstream port 3 D+ connection (analog) ^[4]
V_CC
OC1
6
-
supply voltage; connect to USB supply V_BUS (bus-powered or
hybrid-powered) or to local supply V_DD (self-powered)
7
AI/I overcurrent sense input for downstream port 1 (analog ^[5])
9397 750 07002
Product specification
Rev. 03 — 29 March 2000
© Philips Electronics N.V. 2000. All rights reserved.
3 of 48