PCA9532 Datasheet, PDF (26/29 Pages) NXP Semiconductors – 16-bit I2C LED dimmer

NXP Semiconductors
PCA9532
16-bit I²C-bus LED dimmer
temperature
maximum peak temperature
= MSL limit, damage level
minimum peak temperature
= minimum soldering temperature
peak
temperature
time
001aac844
MSL: Moisture Sensitivity Level
Fig 26. Temperature profiles for large and small components
For further information on temperature profiles, refer to Application Note AN10365
“Surface mount reflow soldering description”.
16. Abbreviations
Table 17. Abbreviations
Acronym
Description
ACPI
Advanced Configuration and Power Interface
CDM
Charged Device Model
DSP
Digital Signal Processor
DUT
Device Under Test
ESD
ElectroStatic Discharge
GPIO
General Purpose Input/Output
HBM
Human Body Model
I²C-bus
Inter-Integrated Circuit bus
LED
Light Emitting Diode
MCU
MicroController Unit
MM
Machine Model
MPU
MicroProcessor Unit
POR
Power-On Reset
RC
Resistor-Capacitor network
SMBus
System Management Bus
PCA9532_4
Product data sheet
Rev. 04 — 17 March 2009
© NXP B.V. 2009. All rights reserved.
26 of 29