TDA8542 Datasheet, PDF (2/20 Pages) NXP Semiconductors – 2 x 1 W BTL audio amplifier

Philips Semiconductors
2 × 1 W BTL audio amplifier
Product specification
TDA8542
FEATURES
• Flexibility in use
• Few external components
• Low saturation voltage of output stage
• Gain can be fixed with external resistors
• Standby mode controlled by CMOS compatible levels
• Low standby current
• No switch-on/switch-off plops
• High supply voltage ripple rejection
• Protected against electrostatic discharge
• Outputs short-circuit safe to ground, V_CC and across the
load
• Thermally protected.
APPLICATIONS
• Portable consumer products
• Personal computers
• Motor-driver (servo).
GENERAL DESCRIPTION
The TDA8542(T) is a two channel audio power amplifier
for an output power of 2 × 1 W with an 8 Ω load at a 5 V
supply. The circuit contains two BTL amplifiers with a
complementary PNP-NPN output stage and standby/mute
logic. The TDA8542T comes in a 16 pin SO package and
the TDA8542 in a 16 pin DIP package.
QUICK REFERENCE DATA
SYMBOL
V_CC
I_q
I_stb
P_o
THD
SVRR
PARAMETER
supply voltage
quiescent current
standby current
output power
total harmonic distortion
supply voltage ripple rejection
CONDITIONS
V_CC = 5 V
THD = 10%; R_L = 8 Ω; V_CC = 5 V
P_o = 0.5 W
MIN.
2.2
−
−
1
−
50
TYP.
5
15
−
1.2
0.15
−
MAX. UNIT
18
V
22
mA
10
µA
−
W
−
%
−
dB
ORDERING INFORMATION
TYPE
NUMBER
TDA8542T
TDA8542
NAME
SO16L
DIP16
PACKAGE
DESCRIPTION
plastic small outline package; 16 leads; body width 7.5 mm
plastic dual in-line package; 16 leads (300 mil); long body
VERSION
SOT162-1
SOT38-1
1998 Apr 01
2