TDA6107JF Datasheet, PDF (2/20 Pages) NXP Semiconductors – Triple video output amplifier

Philips Semiconductors
Triple video output amplifier
Product specification
TDA6107JF
FEATURES
• Typical bandwidth of 5.5 MHz for an output signal of
60 V (p-p)
• High slew rate of 900 V/µs
• No external components required
• Very simple application
• Single supply voltage of 200 V
• Internal reference voltage of 2.5 V
• Fixed gain of 50
• Black-Current Stabilization (BCS) circuit with voltage
window from 1.8 to 6 V and current window from
−100 µA to 10 mA
• Thermal protection
• Internal protection against positive flashover discharges
appearing on the CRT.
GENERAL DESCRIPTION
The TDA6107JF includes three video output amplifiers
and is intended to drive the three cathodes of a colour CRT
directly. The device is contained in a plastic DIL-bent-SIL
9-pin medium power (DBS9MPF) package, and uses
high-voltage DMOS technology.
To obtain maximum performance, the amplifier should be
used with black-current control.
ORDERING INFORMATION
TYPE
NUMBER
TDA6107JF
NAME
DBS9MPF
PACKAGE
DESCRIPTION
plastic DIL-bent-SIL medium power package with fin; 9 leads
VERSION
SOT111-1
2002 Oct 18
2