SC16C750 Datasheet, PDF (2/45 Pages) NXP Semiconductors – Universal Asynchronous Receiver/Transmitter (UART) with 64-byte FIFO

Philips Semiconductors
SC16C750
UART with 64-byte FIFO
s Standard asynchronous error and framing bits (Start, Stop, and Parity Overrun
Break)
s Independent receiver clock input
s Transmit, Receive, Line Status, and Data Set interrupts independently controlled
s Fully programmable character formatting:
x 5-, 6-, 7-, or 8-bit characters
x Even-, Odd-, or No-Parity formats
x 1-, 1¹â„₂-, or 2-stop bit
x Baud generation (DC to 3 Mbits/s)
s False start-bit detection
s Complete status reporting capabilities
s 3-State output TTL drive capabilities for bi-directional data bus and control bus
s Line Break generation and detection
s Internal diagnostic capabilities:
x Loop-back controls for communications link fault isolation
s Prioritized interrupt system controls
s Modem control functions (CTS, RTS, DSR, DTR, RI, DCD).
3. Ordering information
Table 1: Ordering information
Industrial: V_CC = 2.5 V, 3.3 V or 5 V ± 10%; T_amb = −40 °C to +85 °C.
Type number
Package
Name
Description
SC16C750IA44
PLCC44 plastic leaded chip carrier; 44 leads
SC16C750IB64
LQFP64 plastic low profile quad flat package; 64 leads; 10 × 10 × 1.4 mm
Version
SOT187-2
SOT314-2
9397 750 11623
Product data
Rev. 04 — 20 June 2003
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
2 of 45