English
Language : 

SA612A Datasheet, PDF (2/12 Pages) NXP Semiconductors – Double-balanced mixer and oscillator
Philips Semiconductors
Double-balanced mixer and oscillator
Product specification
SA612A
DESCRIPTION
The SA612A is a low-power VHF monolithic double-balanced mixer
with on-board oscillator and voltage regulator. It is intended for low
cost, low power communication systems with signal frequencies to
500MHz and local oscillator frequencies as high as 200MHz. The
mixer is a “Gilbert cell” multiplier configuration which provides gain
of 14dB or more at 45MHz.
The oscillator can be configured for a crystal, a tuned tank
operation, or as a buffer for an external L.O. Noise figure at 45MHz
is typically below 6dB and makes the device well suited for high
performance cordless phone/cellular radio. The low power
consumption makes the SA612A excellent for battery operated
equipment. Networking and other communications products can
benefit from very low radiated energy levels within systems. The
SA612A is available in an 8-lead dual in-line plastic package and an
8-lead SO (surface mounted miniature package).
FEATURES
• Low current consumption
• Low cost
• Operation to 500MHz
• Low radiated energy
• Low external parts count; suitable for crystal/ceramic filter
• Excellent sensitivity, gain, and noise figure
ORDERING INFORMATION
DESCRIPTION
8-Pin Plastic Dual In-Line Plastic (DIP)
8-Pin Plastic Small Outline (SO) package (Surface-Mount)
PIN CONFIGURATION
D, N Packages
INPUT A 1
INPUT B 2
GND 3
OUTPUT A 4
8 VCC
7 OSCILLATOR
6 OSCILLATOR
5 OUTPUT B
Figure 1. Pin Configuration
SR00098
APPLICATIONS
• Cordless telephone
• Portable radio
• VHF transceivers
• RF data links
• Sonabuoys
• Communications receivers
• Broadband LANs
• HF and VHF frequency conversion
• Cellular radio mixer/oscillator
TEMPERATURE RANGE
-40 to +85°C
-40 to +85°C
ORDER CODE
SA612AN
SA612AD
DWG #
SOT97-1
SOT96-1
BLOCK DIAGRAM
8
7
6
5
VCC
VOLTAGE
REGULATOR
OSCILLATOR
1997 Nov 07
GROUND
1
2
3
4
Figure 2. Block Diagram
2
SR00099
853-0391 18662