PCA9564_06 Datasheet, PDF (2/32 Pages) NXP Semiconductors – Parallel bus to I2C-bus controller

Philips Semiconductors
Parallel bus to I²C-bus controller
Product data sheet
PCA9564
FEATURES
• Parallel-bus to I²C-bus protocol converter and interface
• Both master and slave functions
• Multi-master capability
• Internal oscillator reduces external components
• Operating supply voltage 2.3 V to 3.6 V
• 5 V tolerant I/Os
• Standard and fast mode I²C capable and compatible with SMBus
• ESD protection exceeds 2000 V HEM per JESD22-A114,
200 V MM per JESD22-A115, and 1000 V CDM per
JESD22-C101
• Latch-up testing is done to JEDEC Standard JESD78 which
exceed 100 mA.
• Packages offered: DIP20, SO20, TSSOP20, HVQFN20
APPLICATIONS
• Add I²C-bus port to controllers/processors that do not have one
• Add additional I²C-bus ports to controllers/processors that need
multiple I²C-bus ports
• Higher frequency, lower voltage migration path for the PCF8584
• Converts 8 bits of parallel data to serial data stream to prevent
having to run a large number of traces across the entire PC board
DESCRIPTION
The PCA9564 is an integrated circuit designed in CMOS technology
that serves as an interface between most standard parallel-bus
microcontrollers/microprocessors and the serial I²C-bus and allows
the parallel bus system to communicate bi-directionally with the
I²C-bus. The PCA9564 can operate as a master or a slave and can
be a transmitter or receiver. Communication with the I²C-bus is
carried out on a byte-wise basis using interrupt or polled handshake.
The PCA9564 controls all the I²C-bus specific sequences, protocol,
arbitration and timing with no external timing element required.
The PCA9564 is similar to the PCF8584 but operates at lower
voltages and higher I@C frequencies. Other enhancements
requested by design engineers have also been incorporated.
Characteristic
Voltage range
Maximum
master mode
I²C frequency
Maximum slave
mode I²C
frequency
Clock source
Parallel
interface
PCA9564
2.3–3.6 V
360 kHz
PCF8584
4.5–5.5 V
90 kHz
Comments
PCA9564 is 5 V
tolerant
Faster I²C interface
400 kHz 100 kHz Faster I²C interface
Internal
Fast
50 MHz
External
Slow
Less expensive and
more flexible with
internal oscillator
Compatible with
faster processors
While the PCF8584 supported most parallel-bus microcontrollers/
microprocessors including the Intel 8049/8051, Motorola
6800/68000 and the Zilog Z80, the PCA9564 has been designed to
be very similar to the Philips standard 80C51 microcontroller I²C
hardware so the devices are not code compatible. Additionally, the
PCA9564 does not support the bus monitor “Snoop” mode nor the
long distance mode and is not footprint compatible with the
PCF8584.
ORDERING INFORMATION
PACKAGES
20-Pin Plastic DIP
20-Pin Plastic SO
20-Pin Plastic TSSOP
20-Pin Plastic HVQFN
whole wafer
TEMPERATURE RANGE
–40 °C to +85 °C
–40 °C to +85 °C
–40 °C to +85 °C
–40 °C to +85 °C
–40 °C to +85 °C
ORDER CODE
PCA9564N
PCA9564D
PCA9564PW
PCA9564BS
PCA9564U
TOPSIDE MARK
PCA9564N
PCA9564D
PCA9564
9564
n/a
Standard packing quantities and other packaging data are available at www.standardics.philips.com/packaging.
DRAWING NUMBER
SOT146-1
SOT163-1
SOT360-1
SOT662-1
n/a
2006 Sep 01
2