LPC1114FHI33 Datasheet, PDF (150/543 Pages) NXP Semiconductors – LPC111x/LPC11Cxx User manual

NXP Semiconductors
UM10398
Chapter 9: LPC111x/LPC11Cxx Pin configuration (LPC1100, LPC1100C,
Table 161. LPC1111/12/13/14 pin description table (HVQFN33 package) …continued
Symbol
Pin Type Description
R/PIO1_0/AD1/
CT32B1_CAP0
22^[5][2] I
I/O
R — Reserved. Configure for an alternate function in the IOCONFIG block.
PIO1_0 — General purpose digital input/output pin.
I
AD1 — A/D converter, input 1.
I
CT32B1_CAP0 — Capture input 0 for 32-bit timer 1.
R/PIO1_1/AD2/
CT32B1_MAT0
23^[5] O
I/O
R — Reserved. Configure for an alternate function in the IOCONFIG block.
PIO1_1 — General purpose digital input/output pin.
I
AD2 — A/D converter, input 2.
O
CT32B1_MAT0 — Match output 0 for 32-bit timer 1.
R/PIO1_2/AD3/
CT32B1_MAT1
24^[5] I
I/O
R — Reserved. Configure for an alternate function in the IOCONFIG block.
PIO1_2 — General purpose digital input/output pin.
I
AD3 — A/D converter, input 3.
O
CT32B1_MAT1 — Match output 1 for 32-bit timer 1.
SWDIO/PIO1_3/AD4/
CT32B1_MAT2
25^[5] I/O
I/O
SWDIO — Serial wire debug input/output.
PIO1_3 — General purpose digital input/output pin.
I
AD4 — A/D converter, input 4.
O
CT32B1_MAT2 — Match output 2 for 32-bit timer 1.
PIO1_4/AD5/
26^[5] I/O
CT32B1_MAT3/WAKEUP
I
PIO1_4 — General purpose digital input/output pin.
AD5 — A/D converter, input 5.
O
CT32B1_MAT3 — Match output 3 for 32-bit timer 1.
I
WAKEUP — Deep power-down mode wake-up pin. This pin must be pulled
HIGH externally to enter Deep power-down mode and pulled LOW to exit
Deep power-down mode.
PIO1_5/RTS/
CT32B0_CAP0
30^[3] I/O
O
PIO1_5 — General purpose digital input/output pin.
RTS — Request To Send output for UART.
I
CT32B0_CAP0 — Capture input 0 for 32-bit timer 0.
PIO1_6/RXD/
CT32B0_MAT0
31^[3] I/O
I
PIO1_6 — General purpose digital input/output pin.
RXD — Receiver input for UART.
O
CT32B0_MAT0 — Match output 0 for 32-bit timer 0.
PIO1_7/TXD/
CT32B0_MAT1
32^[3] I/O
O
PIO1_7 — General purpose digital input/output pin.
TXD — Transmitter output for UART.
O
CT32B0_MAT1 — Match output 1 for 32-bit timer 0.
PIO1_8/CT16B1_CAP0 7^[3]
I/O
PIO1_8 — General purpose digital input/output pin.
I
CT16B1_CAP0 — Capture input 0 for 16-bit timer 1.
PIO1_9/CT16B1_MAT0 12^[3] I/O
PIO1_9 — General purpose digital input/output pin.
O
CT16B1_MAT0 — Match output 0 for 16-bit timer 1.
PIO1_10/AD6/
CT16B1_MAT1
20^[5] I/O
I
PIO1_10 — General purpose digital input/output pin.
AD6 — A/D converter, input 6.
O
CT16B1_MAT1 — Match output 1 for 16-bit timer 1.
PIO1_11/AD7
27^[5] I/O
PIO1_11 — General purpose digital input/output pin.
I
AD7 — A/D converter, input 7.
UM10398
User manual
All information provided in this document is subject to legal disclaimers.
Rev. 12.1 — 7 August 2013
© NXP B.V. 2013. All rights reserved.
150 of 543