TDA7056AT_15 Datasheet, PDF (12/18 Pages) NXP Semiconductors – 3 W mono BTL audio amplifier with DC volume control

NXP Semiconductors
3 W mono BTL audio amplifier with DC
volume control
Product specification
TDA7056AT
handbook, full pagewidth
n.c.
VP
(1)
100 nF
220 μF
1 to 3, 8 to 13,
4
16, 18 to 20
positive input
0.47 μF
TDA7056AT
5
7
+
−
I+i
I−i
Rs
5
kΩ
DC
volume
control
+
Vref STABILIZER
TEMPERATURE
PROTECTION
6
14 ⁺
17 −
15
RL = 16 Ω
ground
MGM588
To avoid instabilities and too high distortion, the input- and power ground must be separated as long as possible and connected together as close as
possible to the IC.
(1) This capacitor can be omitted if the 220 μF electrolytic capacitor is connected close to pin 2.
Fig.14 Test and application diagram.
For single-end application the output peak current may not exceed 100 mA; at higher output currents the short circuit
protection (MLC) will be activated.
1998 Feb 23
12