74HC_HCT4316_CNV_15 Datasheet, PDF (12/15 Pages) NXP Semiconductors – Quad bilateral switches

Philips Semiconductors
Quad bilateral switches
Product specification
74HC/HCT4316
ADDITIONAL AC CHARACTERISTICS FOR 74HC/HCT
Recommended conditions and typical values
GND = 0 V; T_amb = 25 °C
SYMBOL
PARAMETER
V_(p-p)
sine-wave distortion
f = 1 kHz
sine-wave distortion
f = 10 kHz
switch “OFF” signal
feed-through
crosstalk between
any two switches
crosstalk voltage between
control and any switch
(peak-to-peak value)
f_max
minimum frequency response
(−3 dB)
C_S
maximum switch capacitance
typ.
0.80
0.40
2.40
1.20
−50
−50
−60
−60
110
220
150
160
5
UNIT
%
%
%
%
dB
dB
dB
dB
mV
mV
MHz
MHz
pF
V_CC
(V)
2.25
4.5
2.25
4.5
2.25
4.5
2.25
4.5
4.5
4.5
2.25
4.5
V_EE
(V)
−2.25
−4.5
−2.25
−4.5
−2.25
−4.5
−2.25
−4.5
0
−4.5
−2.25
−4.5
V_is(p-p)
(V)
CONDITIONS
4.0
R_L = 10 kΩ; C_L = 50 pF
8.0
(see Fig.14)
4.0
R_L = 10 kΩ; C_L = 50 pF
8.0
(see Fig.14)
note 1 R_L = 600 Ω; C_L = 50 pF
f = 1 MHz (see Figs 12 and 15)
note 1 R_L = 600 Ω; C_L = 50 pF;
f = 1 MHz; (see Fig.16)
R_L = 600 kΩ; C_L = 50 pF;
f = 1 MHz (E or nS,
square-wave between V_CC
and GND, t_r = t_f = 6 ns)
(see Fig.17)
note 2 R_L = 50 Ω ; C_L = 10 pF
(see Figs 13 and 14)
Notes
1. Adjust input voltage V_is to 0 dBm level (0 dBm = 1 mW into 600 Ω).
2. Adjust input voltage V_is to 0 dBm level at V_OS for 1 MHz (0 dBm = 1 mW into 50 Ω).
General note
V_is is the input voltage at an nY or nZ terminal, whichever is assigned as an input.
V_os is the output voltage at an nY or nZ terminal, whichever is assigned as an output.
Test conditions:
V_CC = 4.5 V; GND = 0 V; V_EE = −4.5 V;
R_L = 50 Ω; R_source = 1 kΩ.
Fig.12 Typical switch “OFF” signal feed-through as a function of frequency.
September 1993
12