74ALVT16501_05 Datasheet, PDF (12/20 Pages) NXP Semiconductors – 18-bit universal bus transceiver; 3-state

Philips Semiconductors
74ALVT16501
18-bit universal bus transceiver; 3-state
Table 8: Dynamic characteristics …continued
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 11.
T_amb = −40 °C to +85 °C.
Symbol Parameter
Conditions
V_CC = 3.3 V ± 0.3 V ^[2]; C_L = 50 pF
t_PLH
propagation delay
An to Bn or Bn to An
see Figure 5
LEAB to Bn or LEBA to An
see Figure 6
CPAB to Bn or CPBA to An
see Figure 7
t_PHL
propagation delay
An to Bn or Bn to An
see Figure 5
LEAB to Bn or LEBA to An
see Figure 6
CPAB to Bn or CPBA to An
see Figure 7
t_PZH
output enable time to HIGH-level
t_PZL
output enable time to LOW-level
t_PHZ
output disable time from HIGH-level
t_PLZ
output disable time from LOW-level
t_h(H)
hold time HIGH
An to CPAB or Bn to CPBA
see Figure 9
see Figure 10
see Figure 9
see Figure 10
see Figure 8
An to LEAB or Bn to LEAB
see Figure 8
t_h(L)
hold time LOW
An to CPAB or Bn to CPBA
see Figure 8
An to LEAB or Bn to LEAB
see Figure 8
t_su(H)
set-up time HIGH
An to CPAB or Bn to CPBA
see Figure 8
An to LEAB or Bn to LEBA
see Figure 8
t_su(L)
set-up time LOW
An to CPAB or Bn to CPBA
see Figure 8
An to LEAB or Bn to LEBA
see Figure 8
t_WH
pulse width HIGH
CPAB or CPBA
see Figure 7
LEAB or LEBA
see Figure 6
t_WL
pulse width LOW
CPAB or CPBA
see Figure 7
f_max
maximum clock frequency
see Figure 7
[1] All typical values are measured at V_CC = 2.5 V and T_amb = 25 °C.
[2] All typical values are measured at V_CC = 3.3 V and T_amb = 25 °C.
Min Typ Max Unit
1.2 1.8 2.9 ns
1.5 2.4 3.5 ns
2.1 3.0 4.3 ns
1.1 1.9 2.8 ns
1.4 2.1 3.6 ns
1.7 2.6 4.1 ns
2.2 3.3 4.5 ns
1.6 2.5 3.6 ns
2.7 3.6 4.9 ns
2.1 3.0 4.0 ns
+1.0 −0.6 -
ns
1.0 0.1 -
ns
+1.0 −0.3 -
ns
1.5 0.6 -
ns
2.0 0.5 -
ns
+1.0 −0.6 -
ns
2.0 0.7 -
ns
+1.0 −0.1 -
ns
2.0 -
-
ns
1.5 -
-
ns
2.0 -
-
ns
150 -
-
MHz
74ALVT16501_4
Product data sheet
Rev. 04 — 8 August 2005
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
12 of 20