XC7WH126 Datasheet, PDF (1/13 Pages) NXP Semiconductors – High-speed Si-gate CMOS device, dual non-inverting buffer/line driver with 3-state output

XC7WH126
Dual buffer/line driver; 3-state
Rev. 01 — 2 September 2009
Product data sheet
1. General description
The XC7WH126 is a high-speed Si-gate CMOS device. This device provides a dual
non-inverting buffer/line driver with 3-state output. The 3-state output is controlled by the
output enable input (nOE). A LOW at nOE causes the output to assume a high-impedance
OFF-state.
2. Features
I Symmetrical output impedance
I High noise immunity
I Low power dissipation
I Balanced propagation delays
I Multiple package options
I ESD protection:
N HBM JESD22-A114E: exceeds 2000 V
N MM JESD22-A115-A: exceeds 200 V
N CDM JESD22-C101C: exceeds 1000 V
I Specified from −40 °C to +125 °C
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range Name Description
XC7WH126DP
−40 °C to +125 °C TSSOP8 plastic thin shrink small outline package; 8 leads;
body width 3 mm; lead length 0.5 mm
XC7WH126DC
−40 °C to +125 °C VSSOP8 plastic very thin shrink small outline package; 8
leads; body width 2.3 mm
XC7WH126GD
−40 °C to +125 °C
XSON8U plastic extremely thin small outline package; no
leads; 8 terminals; UTLP based; body 3 × 2 × 0.5
mm
Version
SOT505-2
SOT765-1
SOT996-2